Wayne2 Posted June 10, 2023 Report Share Posted June 10, 2023 Hi All, I have a Series X unit, that when attempting to boot, the light comes on and flashes white a couple of times.. spins the fan briefly and sounds like it's about to spin the disk drive and then shuts down. Tried the suggested reset options hold the various buttons. There's no video. If you press the CD unload button continually the unit make a sound each time you press it. I've stripped it down to see if the was anything staring at me to indicate a problem, but nothing that I cam see. I have tested the power supply.. I get 11.79 volts on both output leads that goto the circuit boards .. Any one any ideas please, I've if it can be confirmed that that voltage is correct, or could be causing the issue. Many thanks In advance Quote Link to comment Share on other sites More sharing options...
MadMartigan Posted June 10, 2023 Report Share Posted June 10, 2023 This forum is for the original Xbox. While someone may be able to help you, this isn’t the place you want to be. Quote Link to comment Share on other sites More sharing options...
Wayne2 Posted June 10, 2023 Author Report Share Posted June 10, 2023 Oh ... doh ! Many thanks for the heads up. Regards Wayne Quote Link to comment Share on other sites More sharing options...
MadMartigan Posted June 10, 2023 Report Share Posted June 10, 2023 (edited) No problem at all. Try discord if you have it and look for “Xbox homebrew” Edited June 10, 2023 by MadMartigan Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted June 11, 2023 Report Share Posted June 11, 2023 I do like the thread name. I also get a kick out of the fact that there was another Wayne before him that necessitated a 2 afterward. Quote Link to comment Share on other sites More sharing options...
Wayne2 Posted June 11, 2023 Author Report Share Posted June 11, 2023 Manythanks for your help and lol to Wayne2.. cheers guys 1 Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted June 12, 2023 Report Share Posted June 12, 2023 8 hours ago, Wayne2 said: Manythanks for your help and lol to Wayne2.. cheers guys Right on, buddy. Good luck! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.