Search the Community
Showing results for tags 'troubleshooting'.
Found 3 results
Dusted off my Xbox for the kids today - powered it up, it defaulted to MS dash and prompted me for the date and time (good thing, I recall the nightmare of endless loops last time) Set the date, time, played a little Dance Dance Revolution on the native bios with the DVD-Rom (original media) Expected to power the Xbox off, hit the eject button, and boot into Xenium/EvolutionX or whatever I last had installed on the dash... but only get the stock MS dash, and no signs the modchip is functioning. Pulled the torx screws (had to find my screwdrivers) and opened it up. Modchip is installed on LPC header with single wire soldered to the topside of the board. Re-seated the modchip since I was in there, closed it all back up, hooked it back to the TV... still nothing but stock. Most likely cause of no-mod-signs-of-life?
I copied some emulators through ftp to the G partition of my HDD, I was using WinSCP for this. When I finished, I closed the connection and then reset my Xbox with Lt+Rt+Back+Black; I got the Bios screen, the UnleashX boot screen (I'm using a custom skin, so the skin version of the boot screen appeared) and then...nothing, just a black screen. First I thought the video was bad, but that was not the case, then I tried to boot on safe mode but nothing happened. Some people on a subreddit tell me to use Hexen to install another dashboard, I don't know if this is going to work tho. Please, if you know what's wrong with my Xbox let me know, I'm scared
I managed to get an Xbox from a thrift store for free, however, it boots up to an error screen with a number in the top-left corner, 12. I've tried searching online and have found it to be related to the disc drive. I've checked all the cable and have even swapped it with another one, that works. Yet, it still refuses to get past the error screen. Help would be appreciated, thanks.
Board Life Status
Board startup date: April 23, 2017 12:45:48