Search the Community
Showing results for tags 'flashbios'.
Found 3 results
Hi, I have just bought a v1.6 xbox with an xecuter 3 modchip and for some reason it has an evox m8 bios that it boots from. I'm trying to get to flashbios to install an x3 bios but I have 2 issues: 1. No dip switch combo will bring up flashbios, it will just refuse to boot except for the one that has the m8 bios. 2. Pressing power and eject together will usually not make the chip go into recovery mode and if it does I have no video. Is this because I'm using a wii2hdmi mod and the resolution is too high? Obviously as theres no X3 bios on the chip I cant hold white and boot as x3 config live isnt on there due to no x3 bios. Is there any way I can use evox and flash flashbios 3.0.1 onto one of the bios banks? Thanks in advance
I got a used modded xbox today. As I am stupid, instead of reading much into it, I tried to update from Evox m7 to m8 plus. In the update zip I downloaded, there was not only the M8 bios, but also a file called flashbios_v303.bin. I thought that would be the right file to flash, so I did. It seems like the bios is not compatible with my mod chip. While I am able to boot and select a file to flash from the HDD (I tried to flash an old file), it just gives me the error "Unkown flash! Halting". Is there anyway to make flashbios write onto my modchip so I have a working bios again?
Jargon Buster TSOP - IS THE ONBOARD CHIP THAT BOOTS THE MS BIOS , YOU WILL WANT TO BOOT FROM THIS FOR XBOX LIVE. LPC - THE HOLES WHERE THE MODCHIP CONNECT TO THE MOBO USING WIRES OR PINHEADER OR QUICKSOLDER METHODS. FRAG - FLASHES RED AND GREEN. THE XBOX IS TELLING YOU SOMETHING IS WRONG AND IT CANNOT BOOT POSSIBLY DUE TO POOR SOLDERING. BOOT - WHEN THE XBOX LOADS A BIOS AND STARTS UP THIS PROCESS IS CALLED BOOTING. BIOS - THE PROGRAM THAT IS STORED ON THE MODCHIP OR TSOP. IT'S EITHER MS OR HACKED (EVOX OR X2). PIN HEADER - 2 ROWS OF PINS THAT YOU SOLDER INTO THE LPC HOLES AND THEN SIMPLY PLUG YOUR CHIP ONTO IT. MOBO - SIMPLY MEANS THE XBOX MOTHERBOARD. D0 - THIS IS A LITTLE VIA ON THE TOP OF THE MOBO OR A SMALL PAD ON THE BOTTOMSIDE OF THE MOBO THAT WHEN GROUNDED PREVENTS THE TSOP BOOTING. VIA - A VERY SMALL LITTLE CIRCLE. YOU WILL NEED PRACTICE BEFORE YOU CAN SOLDER TO THESE. YOU CAN AVOID THESE ON EARLIER MODELS BUT NOT ON A V1.6 EVOX DASHBOARD - AN ALTERNATE DASHBOARD FOR THE XBOX THAT HAS A MENU TO LOAD GAMES , FLASH YOUR BIOS ETC. NOT TO BE CONFUSED WITH EVOX BIOS WHICH IS DIFFERENT AGAIN. EVOX DASHBOARD IS MADE UP OF A NUMBER OF FILES THAT YOU TRANSFER ONTO YOUR HARD DRIVE OR A CDRW. THE LATEST VERSION IS 3935. EVOX BIOS - A HACKED BIOS FOR THE XBOX , IT ALLOWS YOU TO PLAY BACKUP GAMES AND RUN COOL APPS LIKE EVOX DASHBOARD. THE LASTEST BIOS IS M8 PLUS. X2 BIOS - A HACKED BIOS FOR THE XBOX , IT ALLOWS YOU TO PLAY BACKUP GAMES AND RUN COOL APPS LIKE EVOX DASHBOARD. THE LASTEST BIOS IS 4983. HOT SWAP - THE NAME GIVEN TO THE TECHNIQUE OF BOOTING THE XBOX WITH ONE MODCHIP (WITH THE LID OFF AND THE DVDROM TURNED AROUND THE WRONG WAY) AND THEN UNPLUGGING THE MODCHIP FROM THE HEADERPIN AND REPLACING IT WITH A BLANK ONE OR ONE THAT HAS HAD A BAD FLASH AND THEN FLASHING THIS CHIP. FLASHING - PROGRAMMING A BLANK CHIP OR REPROGRAMMING A CHIP WITH A BIOS FILE. SPIDERCHIP AND ALADDINS NEED A 256K BIOS. DUOX2 NEED A 512K BIOS. ALSO V1.6 XBOX'S REQUIRE THE EVOX M8 PLUS V1.6 BIOS. OTHER MODELS CAN USE THE X2 4981 OR X2 4983 BIOS. FLASHBIOS - A SPECIAL BIOS THAT ONLY LETS YOU DO A FEW FUNCTIONS. (WONT PLAY BACKUP GAMES). ITS MAIN PURPOSE IS TO FLASH YOUR MODCHIP WITH A HACKED BIOS. LOCK - LOCKS A HARD DRIVE SO THE MICROSOFT BIOS AND DASHBOARD WILL BOOT. THIS IS NEEDED FOR XBOX LIVE. UNLOCK - UNLOCKS A HARD DRIVE FOR USE IN A PC. YOU MUST UNLOCK A XBOX HARD DRIVE BEFORE IT CAN BE USED IN A COMPUTER.
Board Life Status
Board startup date: April 23, 2017 12:45:48