Search the Community
Showing results for tags 'faulty'.
Found 2 results
Hi guys, I recently attempted an Aladdin XT plus modchip install on my xbox V1.0. Other then trying to suck out the solder from the LPC ports, the process was relatively smooth. When I first went to boot the box, the Aladdin instantly smoked hard so I it off. At the moment I'm trying to figure out whether it was my install error or a faulty chip. When I remove the chip and boot the xbox, it boots fine and normal. As soon as I add the chip back on, which doesn't smoke anymore, the xbox FRAGS. I tested the LPC pins and didnt get any continuity between ones I shouldnt have. I then tested to make sure the 5 and 3,3 voltages were still good and they were. I was gonna test each individual pin and see if maybe Im seeing 5V/3.3V where I shouldnt, but other then that I'm not sure if it was the install, but instead just a faulty chip. I bought it from Modchipcentral and I've gotten good stuff from them before. Any input would be appreciated. Thanks
I have a dvd drive that reads disks but crashes because the board is faulty - can I take a working board from a dvd drive with a laser that doesn't read disks? And If so is it pretty easy to do - any guides? Thanks
Board Life Status
Board startup date: April 23, 2017 12:45:48