Search the Community
Showing results for tags 'converter'.
-
I need an ATX converter board. N64 Freak is sold out. Does anyone else have a spare they are not using?
-
Have a NTSC xbox 1.0 console but live in Italy here is the 220v current,you can mod the PSU to 110v to 220v? at the moment use a step down converter and works fine.
-
Hi all, I'm wanting to emulate the Steel Battalion Controller and to allow use of a keyboard or joystick or some other configuration which I haven't worked out yet. Just wondering if anyone owns a Steel Battalion Controller, a >24Mhz Logic analyser, a sense of adventure and is willing to help me out!? The information online which I have found so far is pretty limited, There's a small section at the bottom of http://xboxdevwiki.net/Xbox_Input_Devices but it is missing the rest of the interface descriptor and also doesn't have any information about the XID descriptor and capability descriptors allowing the Xbox to actually detect anything with my basic testing. (Maybe it doesn't even have them? I'm not sure yet) What I am looking for in the first instance is: 1. A complete USB descriptor dump of the Steel Battalion Controller when plugged into a PC using something like https://www.thesycon.de/eng/usb_descriptordumper.shtml 2..A Logic analyser trace of the USB data bus with the controller plugged into the OG Xbox console, probably within the Steel Battalion game or during the first 10-20 seconds of the game loading up. I'm a bit more familiar with the Saleae logic analyser software but I can probably work out whatever. But ideally it needs to be able to decode USB packets and control transfers. You can get Saleae clones for under $10 https://ebay.us/BFvaaH 3. I will take care of the rest unless I find something unusual and need further info. I've never actually used or owned one of these controllers so any input to what a good controller configuration on a keyboard/joystick might be would help but getting it detected on the OG Xbox console is the first milestone! Obviously can't guarantee anything, but the intent is that it would be compatible with https://github.com/Ryzee119/ogx360 Cheers!
Board Life Status
Board startup date: April 23, 2017 12:45:48