Search the Community
Showing results for tags '1.6b'.
Found 2 results
Out of nowhere today my 1.6b, X3, 2tb Xbox won't boot. Symptoms are: no frag, the console appears to be booting dvd drive will not eject when the button is pressed. The eject button blinks quickly and you can hear the drive spinning down but it never ejects long press of eject and power gives the pink executor logo on the panel and displays the outline of the Flashbios screen but remains blank Single press of the power button lights the Xecuter logo up red for a few seconds then blue as normal, no boot So, I originally thought the chip might have somehow died, but it absolutely cannot be. I completely disassembled the box, removed the X3 from the pinheaded, put the original IDE cable and hard drive back in, and bypassed the X3 board that interfaces with the power/eject buttons. The console appears to be booting but no audio or video (tv behaves as if it is getting no input signal). I have tried with both the OEM composite cable and the OEM component cable (breakout box) with no change. So now I'm convinced the chip is fine and something died in the console but can't find anything similar when searching. Everything on the motherboard looks fine and this console has worked fine since being modded in 2005. Any ideas?
Hello Folks, I try to intsall a XBIT 1.5 Chip in a 1.6b console. I was having a pretty bad time, since most of the information is gone due to forums and websites are not available in 2018 anymore... But thanks to the wayback machine, I managed to get some information about the installation process of the chip. Well, it looks like that the chip is/was only compatible to v1.0 to 1.5 and the 1.6 revision was not out when this chip was released (I've read somewhere, that there is a 1.6 adaptor board). Anyway, thanks to google, I found out that it should be possible to use that chip in a 1.6 console, but I'm unsure if they used the 1.6 adaptor. After rebuilding the LPC port, I installed the chip as usual (Double checked the pinouts from thechip and the LPC port), left d0 unconnected since I've read, that this is not necessary on 1.6 consoles and performed a LFRAME cut. I flashed evolution-x m8 1.6b bios to the chip with a virutal installation of windows xp (the softwate really sucks and won't work on WIN10...) Well, all I get is the christmas light (Console turning on and off 3 times and flashes red/green) without any video signal. If I bridge the LFRAME signal with tweezeers, the console boots as usual. This either means, that either the connection between the console and the chip is wrong or the chip is broken and I don't know how to find that out. I tried multiple thing, like reconnectnig the LFRAME, soldering in D0, used the 1.5 pinout for soldering, used the 1.6 soldering (but without the adaptor). At the time, I think the chip is broken, because flashing works, but validating the files gives me an error. As said before, I read on a german forum, that you can actually use any not 1.6 compatible chip with a 1.6 console by cutting the LFRAME and not connecting the d0 point. Won't work for me Has anyone some tips, help, suggestion for me? Thanks in advanve!
Board Life Status
Board startup date: April 23, 2017 12:45:48