Search the Community
Showing results for tags 'x3ce'.
Found 11 results
-
Hi All, I have an Xecuter 3 CE with the Xraptr solderless adapter. I want to replace the adapter with a real pin header. Doing so will require to add the 3 pin connector for the modchip with wires for the D0, HDD and LAN led's to be soldered to the MB. I bought this gear almost 20 years ago, and do not have that connector with wires for the 3 points. Did they (team xecuter) use a proprietary jack for the 3 pin wire connector? I looked on Ebay for a 3 pin 1mm jack with foot long cables and found one that should work. But if the X3 jack is keyed a certain way it won't fit. Any advise or suggestions will be helpful....Zagman
-
i almost lost everything in a house fire the fire happened two years ago and at that time i slimmed down my xboxs and only had two of them one just a softmod the other the xecuter 3 now let me tell you these xboxs were directly under my 55in flat screen tv and the tv melted all down on the xboxs now im here to tell you that Microsoft built a tank when they built these things because softmod survived i mean the case is junk both power and eject buttons were melted together i had to break the case apart and pull the power/eject pcb board out to turn it on now i have not cleaned the mother board or anything and it functions so i have hope i have not hooked up x3 to see whats up its the holy grail instead i have it pulled apart and trying to clean the mother board and mod chip and try to get it up and going again the switches are really bad one of the switches got so hot that some of the buttons fell off one switch came apart a spring came out but the switch might still work if you act like there is a spring there it will cycle but they are all melted in some way ie the switches now about the lcd screen i have it all pulled apart i might be able to salvage it it had some sort of tint on the out side of the glass witch is easy i just have to find out about what % tint it was but on the other side of the glass screen for illumination there is a white semi transparent film for even and soft illumination and now mine is is wavy like a pice of bacon and that will effect the screens back light illumination so if i can figure out the tint % and a good replacement for the backlight diffuser i think its what it is lol and to replace these switches https://imgbox.com/g/Pl9bJWtgsZ -
Greetings Everyone, I'm about to install an Xecuter 3CE into a 1.6 Xbox. Does anyone know or have an opinion on whether or not I should cut the LFRAME trace? Thanks, RogueOgre
-
$475 + shipping. 92688 for local pickup. Willing to trade for 3060ti, NVME drives, 3600 mhz ram. 5600x CPU 250GB HDD + Component cables included + an Xecuter 2.6 (just the bare modchip. no dipswitches etc). I dont know if the chip works, as I do not have the dips witches to test. Lower metal shield is rusty. DVD and HDD tray screws are missing. Controller ports are each missing 1 screw. Rubber feet are missing. Bottom of case has scratches.
-
I didnt find a price check thread and wasnt sure where to post this. But wanted to ask how much would this go for? V1.0 Xbox with X3CE + X3CP front panel + 200GB HDD
-
Here's my tower of power My pure White #0108/1000 "Dreamcast" Here's my Hulk (came before the Dew's no matter what people say) Most of my controllers Orange Xbox Live Controller https://thepiratepimp.weebly.com https://www.instagram.com/thepiratepimp/ https://www.youtube.com/user/thePiratePimp
- 36 replies
-
- 9
-
-
- thepiratepimp
- original
- (and 16 more)
-
Finally time to let her go. (Plus I can't find the A/V cable, so your on your own there.) Boots to XBMC fully customized with emus, music, and games. 400 GB worth. - v1.6 xbox w/Red XCM Case (as mentioned, no AV cable. Case has some cracks, mostly on bottom.) - Xecuter 3 CE Chip - X3CP Crystal control panel w X3 XLCD (Not sure why, but the bottom of the lcd isn't working properly. It will with my hand close by, but text disappears when hand is removed.) - Used to have an X3IR, the board is still inside, but no IR. - 400 GB Seagate HD - Samsung disc drive Also have: Xecuter X2.6 CE Modchip (everything but the 5v wire for v1.6 consoles, so won't work on that console without some custom work) 007 Agent Under Fire Game Disc (exploitable to softmod) 4 controllers 80 GB WD HD 250 GB Seagate HD Another 400 GB Seagate HD Games Splinter Cell and Splinter Cell Chaos Theory (only the best games ever...) 4x USB port to xbox controller port adapter AVI to HMDI adapter. (Helped me when booting flashbios on newer TVs.) Let me know if interested in anything. Highest price wins. Everything as is (I've mentioned all issues I know about.) -
What you see is what you get, brand new in package X3CE Xecuter 3 Kit. Accepting offers.
-
Works great no issues comes with all cables
-
I have recently just installed a spare x3ce I have to an og xbox however some bits was missing, I dont have a switchboard or the cable to go to hdd/lan/d0 I have installed the pin header fine and connected the x3 and everything lights up fine i get 5v and 3.3v light ( I have soldered d0 on the back and connected it to the d0 pin on the modchip) however now the console frags. Im pretty confidant my pin header is installed correctly as I have ram upgraded the same board I just cant understand why the console keeps fragging. I have not connected the hdd/ lan but I didnt think that would make any difference? Also the console boots normally without the mod chip on but obviously hangs on the xbox logo due to the 128mb ram.
-
Selling on ebay to make it fair on UK buyers. I really want this to go to a good home, I am only selling as I am moving house and need the money towards fees otherwise I would have kept it eternally haha. Thanks for taking the time to look. https://www.ebay.co.uk/itm/Very-Rare-Team-Xecuter-Original-Xbox-With-TX-Faceplate-128mb-Ram-X3ce-Xapt3r/113716250636
Board Life Status
Board startup date: April 23, 2017 12:45:48