Search the Community
Showing results for tags 'on'.
Hi guys, Bought a v1.3 from gumtree just to get into soldering TBH. I replaced the three capacitors near the CPU and removed the clock one too. The box looks like it doesn't have any mods done, and i don't see any corrosion. It does look like it works, as i can eject the disc and it seems to run, but i get no display or audio. I have tried another cable, but with the same result. Any pointers to what i should check? I have ordered a mod chip just in case the bios is bricked, but otherwise i am not sure what to check.
Hello a couple of days ago I was testing my newly built component cables (Before using them I tested everything with a multimeter and nothing was shorting and I was able to play with them and they looked great since I used shielded 360 cables so I don't think that the cable is the problem) on my Xbox and it was working perfectly fine, I restarted it a couple of times and I didn't have a single problem, today I tried to play again and I got stuck on the iND-Bios splash screen with the light blinking red and green with no change, it just gets stuck there. My Xbox is tsoped and I have installed a 320 Samsung hard drive with an IDE to SATA adapter and an 80 wires IDE cable (Properly insulated), the DVD drive mechanism is not in the best condition since it needs help to eject or insert itself sometimes but it reads discs perfectly fine when they get inside, I tried booting tru Hexen 2019 and the console kept ejecting it, I'm not sure if this is related to the bios stuck problem or the disc drive itself (I didn't have the need to use it for the last half of the year since the HDD was working perfectly fine and I didn't do any major changes to the dashboard/bios). Aside from that it was working without any problems and I didn't change any configs, I just played DOA 3 and Crazy Taxi 3. Now the console just doesn't turn on, I press the power button or eject and the fan spins one time and nothing happens. Video: https://i.imgur.com/aRyVI25.mp4 And i went ahead and took pictures of the motherboard: Motherboard Top: https://imgur.com/a/juHHvXq Motherboard Bottom: https://imgur.com/a/x7QU5BH Capacitors close up: https://imgur.com/a/rtsa2IR None of them seem to be bulging or leaking, and the clock cap is a Nichicon cap (the golden ones) and it looks perfectly fine, the console was retaining the date without problems. Motherboard Sides: https://imgur.com/a/xBjawQV Power Suply: https://imgur.com/a/MsmdA9w Same deal here, all the caps seem to be fine, no leaking or bulging. So i'm not sure what else to check, any advice? Thanks for your time, and let me know if I need to provide more info. Apologies for my grammar errors, English is not my first language.
My OG xbox wont turn on. Not a single bulging or leaky cap. I was going to replace all the caps but I noticed this and I dont know what it is, how to tell if its bad or how to order a new one. It looks kinda burned on the top but it just appears to be the rubber and not the part itself. is there a way to check it with a multi meter. The part I am asking about is the one in the first picture
Hello everyone, I recently bought an Xbox and on the first day I turned it on and it booted up fine. Days later I am now trying to turn it on again and nothing. No lights, no sounds. I have another Xbox and the cable works fine. What do I need to do to fix this issue!
Board Life Status
Board startup date: April 23, 2017 12:45:48