Search the Community
Showing results for tags 'conversion'.
Hi all, As a fun educational exercise to wanted to replace the CPLD logic on the cheap AladdinXT 4032 Original Xbox modchip and convert it to a basic LCD driver, consequently it looses the ability to load a custom bios. I consider this to be something like the old X-addons generic LCD-display mods (but a fair bit simpler) The Lattice LC4032V CPLD on the cheap Alladin modchips is extremely limited, so this is a hacky bare minimum to reduce macro-cell usage to fit onto the CPLD. Therefore it can't really support any extra functionality over the bare minimum. It doesn't support backlight control (just full brightness always) It has some very basic contrast PWM control through the dashboard settings. Anyway just wanted to share what I came up with https://github.com/Ryzee119/AladdinLCD Ideally, you could design a small PCB (and maybe use a larger CPLD) to improve the installation. that is something I may do in the future
Hi, my precious modded Xbox is a UK device and I have been working on the basis that the PSU is 220v only and will need to be replaced with a 110v supply. Can anyone confirm that this is the case - if it can handle multi voltage then that would be a great surprise. Obviously if I need to replace the PSU thats fine - would anyone have any tips / pitfalls I need to be aware of?? Cheers
Board Life Status
Board startup date: April 23, 2017 12:45:48