Search the Community
Showing results for tags 'can’t'.
-
Hi, a few months ago I bought 2 Xboxes to repair. I was happy to find out that one of them had a xt plus chip installed. I have tried flashing evo m8+ to the chip through hexen, unleashed x and xblast (ftp). Xblast got me as far as letting me confirm the flash by letting me press the required button combination. However it stated that the changes were not made and put be directly back to selecting the bios I wanted to use in order to flash the chip. I found online that this usually happens when the soldering of the has not been done correctly. Previously I have opened the Xbox in order to clean it, apply new thermal paste and recap the console. While I was doing this I saw that the xt plus was installed in a different manner as what I have seen previously. Could this be the reason why I am not able to re-flash the chip? I was thinking on desoldering the chip and installing it so it can be plugged in the pin header as normally. Could this solve the issue. I am quite new to modding Xboxes but so any advise would be great.
-
Reposted with pics on Imgur: https://imgur.com/gallery/rH19myY I need help flashing this corrupt Bios chip on my Og Xbox. Unfortunately this is the only way i can reflash it, as i attempted to flash it but forgot to bridge the points now my Og Xbox only works with a modchip. I got around to picking up a programmer TL866II Plus with Xgpro v11.90 Flasher tool. But i keep getting a pin detect error. I first tried it with a new exact replacement chip using a TSOP 40 adaptor. Then ended up losing that chip. And desoldered the one from the motherboard. I also removed the cold solder from the adaptors and added some fresh new high quality solder with flux to make sure that isn’t the problem. I socketed it into the slot and no luck “Pin detect error”. I then ordered another adaptor this time without a socket and i soldered on the bios chip. I also redid the solder joints, as the ones on that adaptor were dull aswell, and no luck. I picked up the correct or the closest settings on the Xgpro v11.90 software. I tried TSOP 40 Hyundai and Hynix HY29F080 with no luck. It yet again gives me a “Pin detect error”. I even tried auto detect and it says chip not supported. On the chip it says Hyundai HY29F080T-90, but i can’t find that exact model number on the menu. Could that be the issue or is it something else. I have no idea as this is my first time using a programmer. And saw a video or two on how to use it.
-
Hi there, so today I upgraded my Xbox’s hard drive to a 2TB WD blue and in unleash X, it’s showing just 500gb available to use as storage. But when I set up the hard drive using hexen, XBpartioner let me choose 900gb partitions for F and G. Is there something I’ve done wrong to not allow the hard drives full capacity? My Xbox had a duo x2 chip and I’m on my bank that has evox bios installed. I didn’t install this chip so I’m unsure of what version of Evox this has. any help in much appreciated. Thanks in advance
Board Life Status
Board startup date: April 23, 2017 12:45:48