Noobmods

This is what I get from Bios checker, and a newer version of Evoxdash started through the Hexen disc as previously mentioned. Sorry if this was not the info you asked for. Quite new to this scene. Have mainly been active in modding Nintendo cosoles in the past. But I have been amazed with what this scene has accomplished and would like to learn and be part of it.

Hi KaosEngineer, thank you for your reply. Here are pictures of the motherboard. If you need any from the other side of the board let me know. I will desolder the chip. Evox Starting from the modchip shows the following Bios and kernel. I will add another post with further pictures with the info I got from bios checker and a newer version of evox dash started through Hexen 2021 disc.

Hi, a few months ago I bought 2 Xboxes to repair. I was happy to find out that one of them had a xt plus chip installed. I have tried flashing evo m8+ to the chip through hexen, unleashed x and xblast (ftp). Xblast got me as far as letting me confirm the flash by letting me press the required button combination. However it stated that the changes were not made and put be directly back to selecting the bios I wanted to use in order to flash the chip. I found online that this usually happens when the soldering of the has not been done correctly. Previously I have opened the Xbox in order to clean it, apply new thermal paste and recap the console. While I was doing this I saw that the xt plus was installed in a different manner as what I have seen previously. Could this be the reason why I am not able to re-flash the chip? I was thinking on desoldering the chip and installing it so it can be plugged in the pin header as normally. Could this solve the issue. I am quite new to modding Xboxes but so any advise would be great.