herooftheday
-
Posts
91 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Store
Everything posted by herooftheday
-
Yes I do use Breadbord jumpers on the one side and soldered to the chip on the jtag and with a pinheader on the lpc side but I bought all the parts for it.
-
I currently use a rpi 2B maybe I will try again with a pi zero w
-
hmm shit
-
sadly still the same "I did recompile"
-
no problem thank you ^^
-
Hi I wanted to use the xeniumprogrammer on one of my chips. It runs fine until the Verify part of the flash memory, I have looked for shorts and nothing out of the orinary. Everything seems fine.
-
Does the newhavendisplay 4X20 OLED-Modul work with spi2par2019
herooftheday replied to herooftheday's topic in Hardware Mods
Heya as far as I can tell it is so pthat the promicro on this put his data with the scl and sda lines to the oled. the arduino code is also there yeah. only the xbox MB part does not seem to have connections on the xenium oled. -
my 1.1 xbox exhaust Fan does not wanna pspin even at 100%
herooftheday replied to herooftheday's topic in Hardware Mods
Yeah I did that just pulled it with a noctua lna adaper from 12 Volt I use a 80mm noctua anyways -
my 1.1 xbox exhaust Fan does not wanna pspin even at 100%
herooftheday replied to herooftheday's topic in Hardware Mods
found the culprid the original replacment fan from the previous owner was open and shorted. is there a way to know what died on the board? -
HI my replacement fan does not wanna spin I upgraded the ram and that was it üduring the top onece it worked and on the bottom ones I did not notice it. It did never got too hot or something like that. I used diferent fan still nothing. and if no fan is connected it is 11 Volts
-
Oh god good luck than. Is this a 1.1 board? You can say what you want about stellar, but looks hella clean though.
-
Well if you want I give you an apple for the stellar. jokes aside will be a nice built maybe next a cpu upgrade on it.
-
Hi does the spi2par2019 for the xenium work with the newheaven oled? or should I stick with a normal lcd? OLED-Modul Gruß
-
That is the main reason I think: And that is with xbox2hdmi and analog2hdmi seems to be abit behind/not thought in that way maybe.
-
yes with spdif Acording to internet and the guy I bought the qsbs from.
-
Only 1.0 have this fault though anyways all the others should work fine with digital.
-
yes xbox2hdmi not analog2hdmi that was already set this way well maybe but sounds over soundbar as good as my bitfunx adapter but I have another one pand will try in on a 1.4.
-
SOLVED 1.0 have issues with spdif just use analog audio.
- 22 replies
-
- 1
-
-
- internal
- analog2hdmi
- (and 1 more)
-
That is how I have it since the begining.
-
Where would that be exactly under audio? or where?
-
The guy that made them also sells them on kleinanzeigen here in germany. https://www.kleinanzeigen.de/s-anzeige/xbox-classic-1-generation-electron-shepherd-hdmi-adapterplatinen/2306803289-279-316
-
here are some pics
-
Hi I installed an Analog2HDMI in my xbox 1.0 with the help of these PCBs: Everthing went smooth video looks great but sadly no audio. I have booted into original dash and turned off dolby surround to surround and ac3 and dts off butr still no luch. Is there a fix for it? I checked everything with a multimeter and the scematics and seems to be good there.
-
cool still the whole thing is hosted in the us and ... and shopify as well is us company....
-
Yeah I make my own for the parts and pcb I pay around 12-15€ so no biggy
Board Life Status
Board startup date: April 23, 2017 12:45:48