Leaderboard

Thats how I have done it in the past, although I didnt use KiCad. KiCad is the tool to use though as it has the option of essentially tracing the image making it into a cloned board.

Here’s what I have on the caps to replace. They’re all surface mount and you’ll need to note the polarity when removing the old ones. Magnification will help you a lot. Also tweezers. Samsung 605F Location Value Volt Dimensions 3 C105, C117, C502 220uf 6v 6.3x6mm SMD 1 C514 100uf 16v 6.3x6mm SMD 1 C221 47uf 6v 5x5.36mm SMD You may also want to check the resistor arrays behind the IDE interface as noted here. and here There are quite a few guides on soldering smd caps on YouTube such as this one I just ran across. Hope this is helpful. Best of luck in your repairs.

here is mine. i have since gone back and removed the x3, installed an openxenium with no_dvdrom and 128mb patched m8 bios. also installed xboxhd+ (pre-stellar), along with the 2.5" hdd caddy recommended (and turned the ssd the other way around).

That makes sense if you get your own gear then deffo practice practice practice

Previous page (scan). I’ve not come across the PCBs

I recently implemented Red Herrings clock cap bypass on my 1.6 mobo and it did not work. Unfortunately I lost r7p3 and r7p6 in the process but I still managed to get the XBOX to boot by just installing an LED in place of the cap and connecting the positive leg to the 2.5 v side of r7p6. Does anyone know if this is safe? I left the xbox running for an hour or two and seemed fine. Also does anyone know what the purpose of r7p3 and r7p6 are?

It does replace it. Prometheos is also flashed to the first bank of the x3 chip.

The Drive is changed now. You need to load them to E:\PrometheOS\Skins\ instead of C. We forgot to change it in the nfo, the nfo will be updated with the next release.

Hey, I've been watching your progress for a couple days now, I cannot wait for this to release! Amazing stuff.

I'll add my url collection of ogxbox 3d print files MattySudz legendary 3d prints MattySudz ogxbox 3d print files: https://www.mediafire.com/file/e09xzobmrnba83j/MattySudz_XBOX_STLs.zip/file Virus Total test result: https://www.virustotal.com/gui/file/ac398e5d0cd313bba9a13b8fe44bcf81518be965a3586a0cecdd51fc1fb41167?nocache=1 3D print fan brackets 3d prints Noctua 60mm fan bracket (A): https://www.thingiverse.com/thing:4617648 Noctua 60mm fan bracket (B): https://www.thingiverse.com/thing:5460707 Noctua 60mm fan bracket (C): https://www.thingiverse.com/thing:5369322 Nexxus 70mm fan bracket: https://www.printables.com/model/79247-original-xbox-70mm-nexus-fan-adapter-and-mount Xbox v1.0 gpu 40mm fan bracket: https://www.printables.com/en/model/79249-original-xbox-10-gpu-40mm-fan-adapter Fan hole fill: https://cults3d.com/en/3d-model/various/original-xbox-fan-hole-fill-1-0 OGX360 3d prints OGX360 T4.1 case: https://cults3d.com/en/3d-model/gadget/ogx360-t4-1 Xbox controller & thumbsticks 3d prints Xbox One to OGXbox Duke/S thumbstick adapter (works on 360 controllers too): https://www.printables.com/en/model/139382-thumbstick-adaptor-for-original-xbox-duke-s-contro Xbox Duke/S thumbstick: https://www.thingiverse.com/thing:2474639 Xbox Duke/S USB to memory unit adapter: https://www.thingiverse.com/thing:4077036 Xbox Duke cable strain relief adapter: https://www.thingiverse.com/thing:5423476 Modchip 3d prints OpenXenium support holder: https://www.printables.com/en/model/313758-xbox-original-openxenium-holder HDD ide to sata adapters, hdd caddy adapters 3d prints HDD adapter for stock dvd drive caddy: https://www.thingiverse.com/thing:4461734 2.5 to 3.5 inch hdd adapter for stock hdd caddy (A): https://www.printables.com/model/351702-xbox-25-inch-to-35-inch-adapter 2.5 to 3.5 inch hdd adapter for stock hdd caddy (B): https://www.thingiverse.com/thing:5596972 Tool-less 2.5 to 3.5 hdd caddy adapter: https://www.thingiverse.com/thing:4970131 Generic sata to ide hdd : https://www.thingiverse.com/thing:3791879 Startech sata to ide hdd bracket: Xbox console outer shell 3d prints Xbox feet with o'rings: https://www.thingiverse.com/thing:4725922 Xbox dvd drive blanking plate: https://www.thingiverse.com/thing:5394953 Vertical console stand: https://www.printables.com/en/model/466979-original-xbox-vertical-stand Xbox v1.0-1.4 to v1.6 conversion: https://www.thingiverse.com/thing:5732958 Xbox v1.0-1.6 front faceplate: https://www.thingiverse.com/thing:5415785 Xecuter X3CP control panel scan: https://www.thingiverse.com/thing:5152786 X3CP control panel round buttons: https://www.thingiverse.com/thing:4854287 X3CP control panel wide buttons: https://www.thingiverse.com/thing:3731819