Xbox console revision 1.0 in good condition with the following specs:
TSOP flashed
2TB SATA hdd
Digitus SATA -> IDE adapter
80pin IDE ribbon cable
On the HDD is the excellent full Arcadepunks XBMC Origins frontend!
Here is a video they made to demonstrate it: https://www.youtube.com/watch?v=XirumHggTqc
The unit has been fully cleaned, no noisy fan's or bad capictors.
The DVD drive is serviced and fully working.
The power supply is 220volt
Picture gallery with images of the Xbox running: https://jiggmaster.synology.me:5008/mo/sharing/5a0ZhM9jY
Item located in Sweden, shipping worldwide
Price = €100 excl. shipping
Hi everyone!
I have a 1.4 with trace issues, upon plugging in the power it starts automatically and when it's off, will occasionally boot at random.
I managed to repair one trace as a preventative but not the 3 needed to ensure it's not an issue anymore, I found them too hard to work on
https://imgur.com/gallery/ExATwa6 (not my pictures, just as an example!)
I did the equivalent of the white wire and blue, is there another place to solder the other green/purple equivalent connections? It would be on the other side of the board I assume.
Recommended Posts
Similar Content
TSOP flashed
2TB SATA hdd
Digitus SATA -> IDE adapter
80pin IDE ribbon cable
On the HDD is the excellent full Arcadepunks XBMC Origins frontend!
Here is a video they made to demonstrate it: https://www.youtube.com/watch?v=XirumHggTqc
The unit has been fully cleaned, no noisy fan's or bad capictors.
The DVD drive is serviced and fully working.
The power supply is 220volt
Picture gallery with images of the Xbox running: https://jiggmaster.synology.me:5008/mo/sharing/5a0ZhM9jY
Item located in Sweden, shipping worldwide
Price = €100 excl. shipping
I have a 1.4 with trace issues, upon plugging in the power it starts automatically and when it's off, will occasionally boot at random.
I managed to repair one trace as a preventative but not the 3 needed to ensure it's not an issue anymore, I found them too hard to work on
https://imgur.com/gallery/ExATwa6 (not my pictures, just as an example!)
I did the equivalent of the white wire and blue, is there another place to solder the other green/purple equivalent connections? It would be on the other side of the board I assume.
Board Life Status
Board startup date: April 23, 2017 12:45:48