Jump to content
  • Similar Content

    • By madmon
      I have a xbox 1.0 here that fragged the day I got it. I thought "oh HDD probably died I'll just install a modchip". Well after installing said modchip I'm still met with 3 power cycles and the red and green lights with no error codes. Ive checked my soldering, checked that D0 is grounded, checked all caps, I cleaned the board after removing the clock cap, inspected traces for any signs of trace rot. Are there any caps that could go that just wouldn't show any sign of swelling or leaking that could cause issues?  
    • By LukeyMFE
      So I’m not the most educated in terms of consoles or modding or repair so please bare with me here. I recently purchased a Translucent Halo edition Xbox on offer up to try and capture that good nostalgia hit that anything from that time does for me and got it for a killer price because of the fact that when it is booted on it errors out to either error 07 or 09. I have jumped down this rabbit hole time after time after time since buying this in trying to troubleshoot, isolate and address what the culprit or culprits are but for every solution I seem to find there I then another 20 questions. I have a very good feeling it is a faulty HDD but I’m not sure if it failed from age or possibly previous owner was trying to mod but the consistent factor and trial error I’ve gone through leads me to believe since it’s clicking that is my issue. Can anyone help me finally complete this project and help me make this the most meaningful console I’ve ever owned?
      Please login or register to see this attachment.
      Please login or register to see this attachment.
    • By bulkchart32
      for some unknown reason, xbmcegamers can't see the halo 2 update. it works fine with unleashx but not xbmc4gamers. anyone know of a fix?

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.