Jump to content
  • Similar Content

    • By Kink43
      Just curious is there a specific ide cable people use as a replacement?
      I have a 500gb data drive installed now. And saw people advise to upgrade to a 80 wire cable.
      Problem is the connectors just don't seem right on a of cable I tried. Distance between them is not right and won't work 
    • By ShinGoutetsu
      Hi guys,
      I posted this on a few xbox groups and thought i'd share it here too. 
      I basically remove the jewel, use a dremel to make a circular hole where the jewel was and then attached a round 800 x 800 pixel (3.4") lcd.
      The video is provided by a small media player such as the Sumvision Cyclone +2 but i am also going to set it up with a raspberry pi zero to save space. Using the small media player means having to lose the dvd rom due to space confinements.
      The interface between the lcd and media player is a HDMI to MIPI pcb with 50 pin flat ribbon cable, you can find them on most china electronics websites. The video is just some boot videos i found and stitched together. This media player can loop playback on start up provided the video is placed in a folder in the root of an SD card or USB stick named AUTOPLAY
       
    • By bulkchart32
      can someone give me a link to the type of ide cable i need for the hdd upgrade? most of the pics for these items are very misleading so i'd like a link to a cable that someone in this group has used before.

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.