Jump to content
  • Similar Content

    • By Ivan GR
      Hi, I bought a broken XBOX version 1.6 (the seller says that softmod is installed on the XBOX), when I turn on the console it blinks three times green and then green and red (no signal on TV). I need to find out why it doesn't work. Can anyone help? Video: Please login or register to see this link.
    • By bulkchart32
      i found some new lasers for phillips drives and bought some. these were brand new because i had to desolder the esd protection solder points on it. i replaced the laser in a drive that would not work at all and now it is working. however, it won't read any disks that have any kind of serious damage. my old samsung and hitachi will play them fine but they have to be almost perfect for my phillips to read them. i have heard about how phillips turn the laser strength down in an attempt to prevent the from reading cd-r disks(fyi, i'm only trying to read official xbox disks). my question is, should i adjust the pots on this new laser so that the laser is stronger? i've heard that will shorten the life of the laser but i'm wondering if they were even turned up high enough in the 1st place?
    • By aries
      Have a NTSC xbox 1.0 console but live in Italy here is the 220v current,you can mod the PSU to 110v to 220v? at the moment use a step down converter and works fine.

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.