Search the Community
Showing results for tags 'mainboard'.
Found 2 results
Open Xenium Modchip: 20€ The same Open Xenium everyone has to offer. SPI2PAR is needed to connect an LCD to it. XBlast Lite V1 modchip: 20€ The XBlast lite is superior to the Open Xenium. It offers Ram checking, direct LCD support and many more features. It's the latest new modchip that has been developed and offers the native XBLast OS. Xerc CME: 15€ Xerc2: 10€ The Xerc2 and Xerc CME are IR-mods to turn the console ON/Off using an ir remote. DIY HDMI mod set: 70€ I have a few HDMI mod sets left. For now only rev1.2-1.4 install sets are avaylable. 128MB upgraded rev 1.4 motherboard: 60€ Xbox Alpha Development kit soundcard: 25€
Hello Folks, I try to intsall a XBIT 1.5 Chip in a 1.6b console. I was having a pretty bad time, since most of the information is gone due to forums and websites are not available in 2018 anymore... But thanks to the wayback machine, I managed to get some information about the installation process of the chip. Well, it looks like that the chip is/was only compatible to v1.0 to 1.5 and the 1.6 revision was not out when this chip was released (I've read somewhere, that there is a 1.6 adaptor board). Anyway, thanks to google, I found out that it should be possible to use that chip in a 1.6 console, but I'm unsure if they used the 1.6 adaptor. After rebuilding the LPC port, I installed the chip as usual (Double checked the pinouts from thechip and the LPC port), left d0 unconnected since I've read, that this is not necessary on 1.6 consoles and performed a LFRAME cut. I flashed evolution-x m8 1.6b bios to the chip with a virutal installation of windows xp (the softwate really sucks and won't work on WIN10...) Well, all I get is the christmas light (Console turning on and off 3 times and flashes red/green) without any video signal. If I bridge the LFRAME signal with tweezeers, the console boots as usual. This either means, that either the connection between the console and the chip is wrong or the chip is broken and I don't know how to find that out. I tried multiple thing, like reconnectnig the LFRAME, soldering in D0, used the 1.5 pinout for soldering, used the 1.6 soldering (but without the adaptor). At the time, I think the chip is broken, because flashing works, but validating the files gives me an error. As said before, I read on a german forum, that you can actually use any not 1.6 compatible chip with a 1.6 console by cutting the LFRAME and not connecting the d0 point. Won't work for me Has anyone some tips, help, suggestion for me? Thanks in advanve!
Board Life Status
Board startup date: April 23, 2017 12:45:48