Search the Community

So i booted my old Xbox OG and it boots with AV and startup logo and gives me error 07. You also hear the HDD clicking and assume that the HDD has given up. I searched a couple of topic's how to get a new HDD working and i am not sure how to do it with the Aladdin modchip. So the Aladdin boots in 2 states (short power btn press) green logo normal boot and (long power btn press) Aladdin boot red logo. I read that installing a new HDD requires EEPROM that is needed for the new HDD to be able to recognizable for the Xbox. Retrieving could be done with a RaspBerry Pi, that i have. Not sure if the Aladdin modchip makes it easier to retrieve the EEPROM, also saw that some people boot HeXen is that maybe a possibility? Don't really need the normal boot, the Aladdin boot would be enough as long it can start the games and maybe FTP file transfer. If someone could point me in a direction which option might be best i can search how to do it. Sorry for my noob question.

As the title says. I have a console that sometime experiences a random power down. I have left the console running for ages on its own and the power down has not happened, then I have been just flicking around in PrometheOS or XBMC4Gamers for a few moments and the console has shut down. This console has been recapped and has no issues booting up at all. However the controller I have been using has a split in the cable right at the top where it joins the cable relief before going into the controller itself. Could this cause a short that causes the console to power down. I am running Cerbios which has a button combo to power down the console and wondered if it could this that is triggering. Pic of cable split for reference... If its not this what else could it be?? I'm stumped lol EDIT - So I have narrowed it down. Its nothing to do with the controller, it only seems to happen with in either the PrometheOS dash OR XBMC4Gamers. It can happen in seconds or it can happen after 15 mins, its totally random. As a test I left the console running with a game playing for 2 hours and no power down. Leaving it on either dash will eventually power down. I have checked and XBMC shutdown timer is OFF.

Hi folks, A friend pointed me in your direction, and I hope you can shed some light of this issue. I picked up an immaculate Xbox today, boxed, sealed manual, still had the plastic over the eject and power buttons, not a mark on the case I played some OutRun2 and Dead or Alive 3, no issues. I then decided to “stress test” and run a game for half an hour, and chose Halo 2, letting it sit in its promo/demo loop. After around 35 mins, the game froze. I ejected the disc, returned to the dash, and reloaded the disc … nothing. The green light around eject just flashes, but there’s no action from the drive other than 3 whirs then nothing. Tonight I took the console apart, and it’s immaculate inside. No leaks, no dust, no bulging caps, not even a spec of dust on the fan … I doubt this console has seen much use, which is what makes this issue even harder to understand. When I had the lid off the drive, I tried to load a game, OutRun2 … but the behaviour is the same for any disc. The lens moves to the top of the track and back 3 times, and each time it returns to its “home” position next to the disc spindle, the spindle tries to turn and moves, if it’s lucky, a centimetre or two. It does this 3 times, then nothing. I don’t get any disc read errors, because the disc doesn’t seem to spin up. The drive, like the rest of the system, is very clean but it just stopped working so suddenly. Any and all advice will be greatly appreciated. I don’t want to return this to CEX for them to scrap it, especially given it’s condition, so I want to try and save it. If the drive is toast, as I suspect it may well be, what are my options in terms of modding without a working disc drive? Thanks all. Edit: I have uploaded a video of the drive in action, here:

hi all, so i tsoped the 1.1 box i got with m8+ and it all went fine cleared out the softmod files and got it all set up to my liking. then tonight i installed xmbc for gamers to drive f as an app(just to try it), cleared the cache ejected the disk and rebooted, when i powered it up as the led lit you could hear an audible plop from the tv speaker it continued to boot, then stopped reset plopped again resarted as a frag but you can hear the harddisk running, the screen is just black. this box has been fine since i got it i have been using it softmodded since i got it just to see if it was stable, i just get it just as i want it then this happened out of the blue. does anyone know where i should start to look, thanks, aly (sinclairuser).

Hi all, First post here. Have my soft modded OG xbox that I have had for probably 18 years. Has a 120GB HDD in it, and I use it mostly for Mame at this point. Just last evening, it started doing something very strange. It boots up OK, I get the factory boot animation, "Matrix Inside", etc, but then when it transitions to the EVO-X menu, the screen only updates what looks like a frame every 2 seconds. It will slloooooowly fade in the EVO-X menu, then I can hold "down" on the controller and it will slooooowly move from one menu entry to the next. It's almost unusable. Once I start an app, everything is OK. For example, Mame works fine. It just literally takes 5-10 minutes to get through the menu to start it up. It has been probably 15 years since I have messed with this thing, as far as modifying anything. Anyone have any suggestion as to what might be going on?