Search the Community
Showing results for tags 'saving'.
Found 3 results
Saving this X2.2 Pro?Hi all, I bought a "broken: for parts" Xbox. It was in good shape externally and when I opened it, it was a 1.1 and all five power caps were leaking. It did, however, have this X2.2 Pro modchip installed. I figured the problem was just the five leaking caps, so I replaced those with equivalents and assumed I had the problem solved. When I turned it on, I discovered it wouldn't move beyond the "Xecuter config live loading" screen. When I tried turning the chip off via the bank switch, the system would boot as far as the flubber animation before showing error 06. Long story short, I'm pretty sure the mobo is a write-off (clock cap was removed but I'm seeing a lot of old leak damage), so I pulled the chip off in hopes of installing it on a replacement motherboard. I'm not super familiar with Xecuter chips...is this chip salvageable? Do I have enough here to do a pin header install? I have a spare pin header, so that's not a problem. Based on my research, I know there was a second smaller cable that included the ground and D0 wires for that purpose, but I don't have it. (Of note, as you'll see, the bank switch is missing the blue dip switch cover, so I'd be ok doing a full 1mb BIOS flash and not using the switch bank.) Thank you in advance!
Futurama ISO not saving ?Hi, I have managed to load games directly from ISO files without a problem, but today I played Futurama and it doesn't save. I then extracted the ISO and I can save the game and options without problem. I still like to make this work from running it directly from the ISO. Is there anybody who has encounters this and an idea how to fix this? I have used the "XISO to HDD Installer" to create the default.xbe but I wonder if this is a certificate issue of some kind.
Ms Dashboard Not Saving Display Settings
immaburrama posted a topic in SoftmodsI'm trying to set my system start up in 720p. If I go to the MS dashboard from UnleashX menu, change the settings, do a soft reboot UnleashX will come back up in the display settings I've set. If I power off the system and power back on these settings don't save. The only settings that do stick are what I set in the UnleashX dashboard settings. The MS Dashboard reverts back. Any suggestions? Not sure if relevant but: -Using a Pound Technologies HDMI cable -Softmodded xbox using rocky5 migration to sata and upgraded ide cables -Just removed my clock capacitor.
Board Life Status
Board startup date: April 23, 2017 12:45:48