Search the Community
Showing results for tags 'problem?'.
-
I've had a v1.6 Xbox with a pro-fitted Xecuter 2.6CE since 2005 and its been pretty much perfect until recently. On two or three occasions its refused to boot either via the Power button or the Eject/Close button. I get a green/red flashing LED typically indicating a hardware error. Sometimes it does that once and then shutdown, others times it frags. However I found that if I shutdown, switch the chip off, boot to Error 5 (unlocked HDD) then switch off and reboot with the chip back on everything is back to normal. But yesterday I noticed something else weird: the chip has two 512K banks with the originally supplied custom EvoX BIOS on both. The only difference between them is Bank 1 has the EvoX logo and Bank 2 doesn't. I usually have it set to the EvoX logo one but now it has swapped to the non-logo version on boot. It doesn't seem to matter whether I switch banks or not. You might think a connection problem with the switch array ie. it is stuck on Bank 2 but, here's the weird thing: if I Reboot from my Unleash main dash or IGR the EvoX logo version BIOS appears to be used. Never heard/read about anything like this - any ideas what is going on?
-
https://imgur.com/a/OJsz0Uw please click that link so that u can see a video of what i'm talking about. you'll notice that there are vertical static(static as in fuzzy static on a tv not, static as in "unchanging") lines on the screen when there is a dark scene. the video doesn't show it too well but they are even easier to see in person. that is the opening sequence of xmen legends. i have this problem on 2 of my stock xbox v1.0's and on my modded v1.4(i also have the diagonal lines on it). the lines do not appear on my v1.6's. i've tried it on 2 stock and one modded 1.6 and none of the 3 have the problem. i am connected thru the official hd xbox thing(with the component cable outputs). i'm wondering if it is an issue with certain capacitors that cause this? if so, does anyone know which specific ones cause it? the reason i ask is because it would be a pain to fully recap each board of the xbox when they are functioning perfectly in all other areas so i'd rather just replace the specific ones instead of recapping the whole board. btw, none of the cap are bulging or show obvious wear. i know that the 1.4's are very prone to the diagonal lines because of bad caps but i don't which ones are the problem.
Board Life Status
Board startup date: April 23, 2017 12:45:48