Search the Community
Showing results for tags 'correctly'.
-
I learned the hard way today that XBPartitioner used 32kb clusters instead of 64 for my 500GB SSD, when I suddenly couldn't write files anymore after transferring over 250GB. After reformatting with XBPartitioner, my F drive changed from ER to 32. Still not 64, but whatever. However, after setting up a new disk with Hexen, the partition goes back to ER. I can press the A button on that partition 600 times and it will never change to 64kb clusters, and when I format it again using 32kb clusters, it doesn't change from ER. All of my partitions are left default how Hexen configured them except for my F drive which is 458GB after pressing B. How can I get my drive working correctly?
- 5 replies
-
- xbpartitioner
- 1.3
- (and 4 more)
-
Hello All, I recently put a Seagate 3TB HDD in an original xbox Rev. 1.6 with Xecuter 2.6 modchip. I split the F and G drives evenly and everything installed and worked fine. I just tried the same with an identical hard drive in a xbox Rev. 1.4 with Xecuter 3 CE modchip (X3 3294 Bios) and the G-drive size doesn't display correctly. I used TruHeXEn 2021 DVD-R to format the new drive. I then used XB Partitioner on that same DVD-R to format the F and G again. I pressed "A" until the F and G were even and made sure they were 64k clusters. Formats in XB Partitioner fine and then when I check the hard disk settings while still in TruHeXEn, they both display and show the same expected size. But when I eject the DVD-R and boot off the HDD and check hard disks in dashboards, the G-Drive shows as 0MB and sometimes doesn't display at all. The F works fine though. I tried formating them @ 10 times, same thing. If I FTP in, the F-Drive shows and is writable, but the G-Drive doesn't even display as an option. Any ideas why the G-Drive is not displaying the correct size? Thank you!!!
-
Hello, just wanna know: how do I check if a certain ISO I have is XISO or normal ISO ? Once I know what kind of ISO it is, how to correctly burn it ? So far, I've burned some installers correctly like Slayer Installer 2.7 and Hexen 2018, on a DVD-R and they work well. But I'm not pretty sure, especially about Dual Layers, which cost a lot, so I don't want to fail the burning you know. Any proper advice answering my questions ? Thank you so much.
Board Life Status
Board startup date: April 23, 2017 12:45:48