Search the Community

So my xbox was working fine. I thought there was a wire getting hit by the fan so i opened it up and unplugged the hard drive to see if i could see anything. I didnt so i plugged the hard drive back in and now i cant get the xbox to boot. it just goes to a black screen. the light on the front stays green but its just a black screen. My xbox is hard modded with a xenium chip and xbox HD+. i can boot into the xenium menu and ftp into the console but i can only see "C" and E" folders. i did make sure the cable to the HDD was plugged in all the way.

Hello Guys. I need some advice. I have a Xbox 1.4 with a windbond chip that I TSOPed a few years ago using a Hexen disk, I don't remember exactly the bios that was flashed, but when I turn on the xbox the evoX logo comes up, so I'm gonna guess my xbox has a m8 plus. The console works fine, but the fan is very noisy (it's a Sunon), so today I disassembled the xbox, replaced the thermal paste in both gpu and cpu (i've gained like 5 degrees), cleaned and oiled the fan and...it's still very very noisy and loud. So, I've been looking for a replacement fan, and found that people recommend the "Nexus 70mm Real Silent Case Fan". But, they also recommend to up the fan speed (to 40% I think) because by default, it won't cool the console as the stock fan does. To do that, ¿I should flash a new Bios right? the m8 plus using EVtools and selecting 40% fan speed? something like this: My DVD drive is dead, so I can't use Hexen, or the OGXBOX Installer, but I can FTP to the console. Any advice on flashing a windbond chip? Thank you so much for your time.

Unable to flash BIOS. Error reading bios file (see pic). To me it sounds like I have a bad DVD burn? Just wanted to confirm. I did burn at the slowest write speed. Will re-burn again. -v1.1 mobo -XeXEn 2018 -Using Verbatium DVD+R media -Attempting to flash iND-BIOS.5004 (F and G) to use 2TB SATA HDD. Thanks in advance.