Search the Community
Showing results for tags 'before.'.
Hello a couple of days ago I was testing my newly built component cables (Before using them I tested everything with a multimeter and nothing was shorting and I was able to play with them and they looked great since I used shielded 360 cables so I don't think that the cable is the problem) on my Xbox and it was working perfectly fine, I restarted it a couple of times and I didn't have a single problem, today I tried to play again and I got stuck on the iND-Bios splash screen with the light blinking red and green with no change, it just gets stuck there. My Xbox is tsoped and I have installed a 320 Samsung hard drive with an IDE to SATA adapter and an 80 wires IDE cable (Properly insulated), the DVD drive mechanism is not in the best condition since it needs help to eject or insert itself sometimes but it reads discs perfectly fine when they get inside, I tried booting tru Hexen 2019 and the console kept ejecting it, I'm not sure if this is related to the bios stuck problem or the disc drive itself (I didn't have the need to use it for the last half of the year since the HDD was working perfectly fine and I didn't do any major changes to the dashboard/bios). Aside from that it was working without any problems and I didn't change any configs, I just played DOA 3 and Crazy Taxi 3. Now the console just doesn't turn on, I press the power button or eject and the fan spins one time and nothing happens. Video: https://i.imgur.com/aRyVI25.mp4 And i went ahead and took pictures of the motherboard: Motherboard Top: https://imgur.com/a/juHHvXq Motherboard Bottom: https://imgur.com/a/x7QU5BH Capacitors close up: https://imgur.com/a/rtsa2IR None of them seem to be bulging or leaking, and the clock cap is a Nichicon cap (the golden ones) and it looks perfectly fine, the console was retaining the date without problems. Motherboard Sides: https://imgur.com/a/xBjawQV Power Suply: https://imgur.com/a/MsmdA9w Same deal here, all the caps seem to be fine, no leaking or bulging. So i'm not sure what else to check, any advice? Thanks for your time, and let me know if I need to provide more info. Apologies for my grammar errors, English is not my first language.
So after 19 years I pulled my v1.0 out blew the dust off of it. Turned it on things were not ok. Long story short clock cap pulled, damaged traces fixed. Fired it up and the Xenium logo comes up , some text in upper left that can’t be read lol then it just sits there and does nothing. Chip led is lit up red, used to be orange. Reset solderless pin mount and double checked D0 everything looks good....but again still stuck at boot up. Could use some input. Thanks in advance for patience as I’m sure this has come up before ..I couldn’t find it.
Board Life Status
Board startup date: April 23, 2017 12:45:48