Search the Community
Showing results for tags '(no'.
-
This thread will demonstrate how the xbox jewel can be removed, and in a pair of follow-up posts how a hole for it can be made on the xbox cover, all in a very low-tech manner. I'm not confident enough to call these tutorials, but they may be helpful. First: removing the jewel. I grab a couple feet of dental floss and stuff it under the edge of the jewel with a card or what have you. Then I dribble some rubbing alcohol down there, because in my experience rubbing alcohol acts as a mild solvent on the adhesive pad thingy underneath. Whatever helps. By the way it was another modder, not me, who invented the floss method. I start flossing while keeping the arms of the floss in that letter U shape. I'm going to add more alcohol in a minute and re-position the floss at the other side of the jewel then continue working it. After a while the floss approaches the middle of the jewel and it starts to bind, that's when I add some mineral oil to lubricate everything. Pretty much any type of oil will do though. The whole mess starts to look like this... Getting farther in, the floss wants to bind again despite the oil. I don't want it to snap. I lift one of its arms to a 90 degree angle and slowly work the floss back into action. Eventually the jewel is off. This took maybe 10 minutes.
-
I would like to know if there's any way of extracting and then injecting a custom Microsoft logo into the Xbox BIOS, usually its "xboxkrnl.exe" I may be wrong.
-
still having this issue i get freezing/buzzing at the flubber logo with my hdd installed with everything correctly in place using the FatXplorer 3.0 beta to build/preload the drive and I have EVo bios installed too so hdd locking shouldn't be an issue i get a 07 (hdd time out) with no hdd installed (pretty obvious)
Board Life Status
Board startup date: April 23, 2017 12:45:48