-
Posts
31 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Store
Posts posted by naits
-
-
This is now solved... I just didn't actually "write" to the partition when I tried to completely delete it.. After I did that and re enabled the partition and formated it again, it shows up as 469Gb.
-
51 minutes ago, SS_Dave said:
What Bios are you using?
Some Bios's are set to no G drive.
Cheers
SS Dave
Soft modding is like having a wank, It gets the job done but it's nothing like the real thing.49 minutes ago, KaosEngineer said:How is your Xbox modded?
If Softmodded, which softmod package did you use.
If Hardmodded, which BIOS is being used.
It was first softmoded with Rocky5's xbox-softmodding-tool, and also now running BIOS ind 5004.67
-
-
Hello, I've just upgraded my hard drive. Added a 80-wire 40 pin and with a pata to sata adapter.
It cloned just fine. I selected selective partition (C,e,f and g) as it stated G would take the rest of the space. It's a 500Gb hard drive.
But.. It says partition G is 0Gb available.. And F is at 120Gb. But XBpartitioner 1.3 sees G at around 300Gb. So why isn't it available for me to use?
But really F can take it all correct? So no need for G..?
Okay, I disabled partition G and filled partition F with all it can have(it said 400Gb ish) and I wrote that to the disk with XBpartitioner 1.3. And now it says it only has 246Gb... Where did the rest go... I'm lost
UPDATE:
okay... UnleashX shows me under storage menu that is "sees" 469Gb ish.. But only available 246Gb... But the partition is empty???
Anyone got a clue?
-
50 minutes ago, KaosEngineer said:
Xecuter 2.3 Lite
More pictures can be found of it here (Scroll down till you see the version you have).
31 minutes ago, KaosEngineer said:Don't find installation instructions on that exact version. It seems to have had a short lifetime as the Wayback Machine's captured pages are for installation of the X2.3B Lite. Nothing easily found from the time teamxecuter's website went from Tutorials Coming Soon (12/31/2003) until X2.3B Lite Wire or Pin header installs (02/14/2004) or LitePlus tutorials were saved. There's a couple month gap where the Wayback Machine was not capturing new content of the teamxecuter.com website.
Thank you or the link It was already installed when I opened my old Xbox. So I am good Just finished removed clock cap and cleaned the mobo a bit. It fired up nice. Currently backing up its hard drive. It's most likely never been turned on in like 10 years or so...
Its sad that all the info from that website is almost gone....
-
Hello guys! I just dug through every single corner of my parents basement.. With success I found my first ogXbox! That I remember my dad knew someone who modded those. I also remember it was of course. Tons of installed games But my question, what modchip is this? I can't really remember what it was... And I can't turn it on yet.... Have to remove clock cap, cleaning and so on.
So now I've got my first OGXbox and my new OGXbox
Some pictures: (https://photos.app.goo.gl/ouR38ZZmJor4v6PK6)
-
14 minutes ago, Higgi78 said:
This link is now dead too. Would somebody kindly repost another please?
Works fine for me
-
-
I've managed to get the Black Screen away, and some games worked at some point.. But now nothing(Haven't changed any settings since then) it just goes back to the home screen. And every rom is from "EWJ 212 Standalone"
Here look:
-
1 hour ago, bot_1 said:
Thought this would help.
Make sure to scroll through the entire post though, they seem to have updated/completed their lists quite some times...
Greetings
Bot_1
Yea, it definitely will! Thank you.
And yes I will
-
10 minutes ago, SS_Dave said:
With IND bios there is a config file on the c:drive you should be able to set it there or hexen can change the default dash as well
Cheers
SS Dave
Those that can Hard-Mod. Those that can't Soft-Mod.
Ahh I see!!
I changed DASH1 from: DASH1=\Device\Harddisk0\Partition2\evoxdash.xbe to: DASH1=\Device\Harddisk0\Partition1\Apps\XBMC\default.xbe
In a file named ind-bios.cfg
And it worked flawlessly! Thanks.
- 1
-
Just now, Swirlygiver said:
Thanks naits. But That doesnt help much. I can FTP in, I just don't know how get it going again.. I am running it on a TSOP v1.0, which already had the softmod files removed.
Np man, I am out of ideas for now.. I will post back if I find something related to this. Good luck!
-
Okay, this is defiantly weird.. I googled around a bit. I found this: https://www.xbmc4xbox.org.uk/forum/viewtopic.php?t=953
But I am unsure if that will help. But worth a look I guess.
I am in the process of making XBMC my main dashboard too.. So I hope I don't run into any kind of issues like this..............
-
3 minutes ago, SS_Dave said:
You will find that any time you use the Hexen disk it defaults your dash.
I use a SlaYers disk that leaves thing alone and doesn't leave a foot print on your hard drive.
Have a look at XBMC4Gamers but the choice of Dash is a personal thing.
Cheers
SS Dave
Those that can Hard-Mod. Those that can't Soft-Mod.
Ahh okay, well I guess I am making a slayers disk then
But yea XMBC4Gamers, I have it as an app right now.. But I would like it to boot that as default, but I am not sure how to change that at the moment.. So I am looking into that
And it's currently downloading MAME emulator, so I gotto wait for that...
-
19 minutes ago, bot_1 said:
Hi guys and welcome to the forum!
Since you are talking about replacing caps: some time ago, i found a excellent post in another forum listing all the caps for the different xbox versions. Have a look:
https://www.badcaps.net/forum/showthread.php?t=48951
Greetings and happy modding!
Bot
Thank you
And thank you for that link! Now it just became a lot easier
-------------------------------------------
Versions 1.2 to 1.5
-------------------------------------------
Mobo Caps:
13x 25v 22uf Nichicon VR
7x 25v 100uf Nichicon VR
3x 6.3v 3300uf Nichicon HM
2x 10v 3300uf Nichicon PW
1x 16v 680uf Nichicon PW
3x 6.3v 1500uf Nichicon HD (Solid)
1x 1F 2.5v SuperStor!
SMD Caps:
1x 16v 47uf
5x 16v 10uf
(Delta) PSU Caps:
1x 400v 150uf Rubycon USR
3x 50v 0.22uf Taicon?
2x 25v 100uf Taicon?
1x 25v 47uf Taicon?
3x 10v 2200uf Ltec (Blue/Green)
1x 16v 1000uf Ltec (Blue/Green)
RAM:
Samsung
K4D263238D-QC50 (v1.2-1.3)
K4D263238F-QC50 (v1.4-1.5)
-------------------------------------------
Version 1.6
-------------------------------------------
Mobo Caps:
11x 25v 22uf Nichicon VR
3x 25v 100uf Nichicon VR
3x 6.3v 1500uf Rubycon ZL (Wet)
5x 6.3v 3300uf Rubycon MBZ
SMD Caps:
1x 16v 47uf
3x 16v 10uf
(Delta) PSU Caps:
3x 50v 1uf CapXon?
1x 50v 0.47uf CapXon?
1x 50v 10uf CapXon?
1x 50v 22uf CapXon?
1x 10v 2200uf CapXon?
1x 25v 470uf CapXon?
1x 10v 3300uf CapXon?
2x 200v 330uf CapXon? -
6 minutes ago, SS_Dave said:
All good
I would not touch Hexen with a 20foot barge pole, the final straw for me was I tried to use one of the apps on the disk and when I rebooted the Xbox my dash had changed.
Cheers
SS Dave
Those that can Hard-Mod. Those that can't Soft-Mod.
Hehe, yea after I used it the dashboard changed a bit.. But for now it's fine by me. But I've seen some nice ones here and there.. Do you recommend any specific ones?
-
40 minutes ago, Noomi said:
But they are specific for the 1.6. I have not located a set that works for the other models yet. But i do need one for me 1.4, same as you.
Thank you I guess I could just look at the caps, the next time I have my Xbox open... To see the details of what they are.. So I/we can just get replacements that way.
Just found this site: https://no.farnell.com/c/passive-components/capacitors
-
2 minutes ago, Swirlygiver said:
I can’t seem to ftp them in
can I burn them to disc and copy them in from file manager in UnleahX?
Are you using FTP while the Xbox is on the fatal error image?
if so, try to run Rocky5s extra disc and then FTP into the Xbox.
-
31 minutes ago, Noomi said:
Hey (Heisann)
Removed the clock cap on the 1.4 xbox of course, but on the 1.6 you are no supposed to remove it. It has to be replaced. 1.6 is not like the other models.
I am going to replace all the other caps. A set of caps for the 1.6 on was very cheap.
Hehe, Heisann ja.
Yes on the 1.6 it's a different story Ahh I haven't thought about doing that.. That might be something I could do to mine as well. I've got a 1.4 Xbox. Any possibility you might send me a link to the set of caps you bought?
-
7 hours ago, Noomi said:
Hi,
Norway checking in!
Back in early 200s i owned a chipped xbox, but sold it. In the last two weeks I have suddenly bought a chipped, and an original xbox. IDE/Sata-adapters 80-wires cables, capacitors etc are on the way from ebay and I have spent alot of this weekend downloading and unpacking games.
Man its so much fun! Thanks for this excellent forum guys!
Norway here as well! Just got hold on a xbox last week. So far I've softmoded and flashed my TSOP. Only waiting for 80-pin ribbon cable and a sata adapter.
You going to replace the clock cap? It's okay to just remove it. If you plan to softmod it will receive the time from the internet anyway.
I owned an og xbox when it first came out as well. But suddenly a couple of weeks ago, i got the urge to get one and turn it into a EMULATION box.
And greetings to you!
-
16 minutes ago, Swirlygiver said:
Appreciate the info. Thanks.
It says: “Easy configuration via .cfg file. Can also be edited or created with iND-BiOS Config App.” Any idea where I find that?
I've not tested this myself.. As I've just flashed my TSOP for the first time.. Today..
I found this post:
and here:
-
1 minute ago, Swirlygiver said:
Will both ind5004 and x2-5035 support 128 mb ram? I plan to upgrade.
I found this at some point: https://www.reddit.com/r/originalxbox/wiki/bios/features
It seems both do support it.. By looking at that list.
-
6 hours ago, SS_Dave said:
Copy Xblast to the C drive and copy the bios.bin to a folder c:/bios
Cheers
SS Dave
Those that can Hard-Mod. Those that can't Soft-Mod.
I've have now been successfully flashed! I ended up using Hexen 2018.. I didn't get xblast to boot for whatever reason.
I chose the ind bios 5004.67 from the menu within hexen for the winbond tsop. And it worked.
Thanks again.
-
5 minutes ago, SS_Dave said:
Here is Xblast
https://www.dropbox.com/sh/s6a24019u5lsv2j/AABoyFw10RwO0QKNx2iU7AQea?dl=0
And here is IND bios
https://www.dropbox.com/s/7izf8cxvzgsykmv/iND-BiOS.5004.67.bin?dl=0
Cheers
SS Dave
Those that can Hard-Mod. Those that can't Soft-Mod.
Awesome! Thank you!
I've downloaded those files now. And I will be doing the solder during today, and I will try to flash it Really, thanks!
Board Life Status
Board startup date: April 23, 2017 12:45:48
Broken Dvd and Hdd Help!
in General Xbox Discussion
Posted
For sure... Those are about to blow