zatchbot
-
Posts
110 -
Joined
-
Last visited
-
Days Won
9
Everything posted by zatchbot
-
Works with my Maxtor Quickview and Cerbios. Should work in your case!
-
Make sure you swap your IDE cable to an 80 wire cable as well. Adapters don't play nice with stick 40 wire cables, in my experience. Pretty much any 2 port IDE cable will work, but if you want a drop in replacement Xenium Mods makes a custom 80 wire that matches the OEM size and connector lay out. A bit more pricey but looks great if your case is clear. https://www.ebay.com/itm/195346956559?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=HEkCYLO_QvK&sssrc=2349624&ssuid=K2EhkXBLRdu&var=&widget_ver=artemis&media=COPY
-
I really only grabbed RedHerring's post because Dustin (MakeMHZ) hasn't directly stated that there is no plan for support but he has made a few dismissive jokes about people using Cerbios. RedHerring is the guy who reversed the NES and made the OpenTendo. He has helped with the HD+ work from what I gathered and is a verified installer. He has pretty solid info most of the time. My guess is that reverse engineered > post release leak > pre release leak is the logic with that statement, just a guess. Could be wrong, but that was how I took it. Depending on how early the leak was, and what the "bugs" were that are being referenced, there could be pretty major changes. It would also explain a little better why the same patches would not work for Cerbios. While I agree with you 100%, we seem to only make up a small chunk of people who want both lol. Maybe there comes a day MakeMHZ writes a patch but I expect the solution to eventually come from a community member.
-
There is little hope these two communities will come together without a third party... for various reasons. https://discord.com/channels/643467096906399804/748082772752728076/1026389695833321523
-
That's that I was thinking too, but haven't started playing with OGXHD yet to know any of the limitations. It will be cool if it just patches like anything else!
-
Has anyone actually edited a MS dash xbe for 720p and had it work? The theory makes sense but how hard is it to accomplish?
-
Thank you!!! So from what I'm understanding, I should replace the cap, but the frag may remain afterwards? I ended up finding my old Aladdin XT+ from before the current run of fakes. Put that in the 1.6 and flashed EvoX with compatibility with my HD from the 1.0. Now I'm using it as a backup until I get my first one running. Edit: I just ordered a bag of 10v Kyocera caps and also 6.3v Kemets. I also put a $15 bid on a dead board on ebay for spare parts. I'm getting this thing running one way or another lol.
-
Side note, this thing booted 3 separate times, played 2 different games for over an hour, and idled at dash for ~45 min first night I got the ram installed. I let it sit for a few days then it FRAG'd first time I tried to boot. What are the chances it ran without that cap?
-
That explains the wonky reading from my 1.6 that I contemplated cannibalizing. I was getting 26.2~26.8 ohm and was too tired and pissed off to think it was anything else. While I don't expect this... do you know the footprint? I didn't measure yesterday and am too new to electronic repair to eyeball it. It would be awesome if I can figure this out without being home. I want to order some before I get off work.
-
I accidently hit C6R5 while doing a 128mb upgrade. I assume it is a 29 ohm like the others near buy? I has hoping someone maybe could verify before I purchase a bag of them lol.
-
I was previously aware that there was a difference between the two file types, but never looked into it. I am currently falling into a hole about LZMA and BCJ2 lol.
-
That did the trick. This is the first time I have ever used Windows to transfer anything for my Xbox. At home 7zip is default. Lol, that's what I get for messing around at work I guess
-
I can't seem to get the file to extract?
-
Thank you!!
-
I am attempting to play my Greg Hastings backup from my storage and am getting a black screen. I understand there is a fix for this, but am unable to locate it. Is there anyone who can point me in the right direction? TIA!
-
I am a diehard xbox fan. I have owned xboxes since the early 00's and just last week finished my first hardmod. Looking forward to utilizing the great info here!
Board Life Status
Board startup date: April 23, 2017 12:45:48