Jump to content
OGXbox.com

SakisTheDrifter

Members
  • Posts

    108
  • Joined

  • Last visited

Posts posted by SakisTheDrifter

  1. 16 hours ago, TEK Nemesis said:

    After you did all that, what does XBpartitioner say?  If it says "ER" then you still have a problem.

    I didnt check and cant do it now since i have formated and filled my Hdd with F and G drive and dont want to reformat it with F only

  2. 4 minutes ago, Acidmank said:

    Re-flashing bios on dead aladdin x2 Plus2.

    Im not sure what went wrong but i tried to update the aladdin x2 Plus2 to the ind 5003 via Xblast  ( loaded oh hdd )

    The flash appears to be successful but after a reboot i got the 3 boots and frag.    Now it appears the chip is dead.?

    Thankfully i had another X2 Plus 2 and using that i can boot again 
    I thought maybe i could hot-swap the chip and re-flash the bad one.  However when i pull the chip the console appears to freeze and video goes to black.   

    Im running off a Hexe 0.99b11-22 heimdalls xbox engineerind disc to try and re-flash

    1.6 pal xbox

    Any ideas if this is possible?

    I have never done this but i think its possible. Just to know,your xbox is fragging because the ind-bios is NOT compatible with 1.6 xboxes

  3. Even if the xbpartitioner formats the F partition with ER clusters,wouldnt the AID format menu correct it?because after i made the partitions with xbpartitioner,i run auto installer deluxe 4.53,format the whole HDD within its format menu and finally started filling the HDD

  4. Just now, Uraeus said:

    I have already tried doing that but it doesn't allow me to make bigger any of the partitions 1-5 using the triggers. I can only set the partition size between 0 and the default value for partitions 1-5 (even after having reduced the size of the partitions 6 and 7 and therefore having free space indicated at the bottom of the screen). I did a fresh install of the 2Tb Hard drive using Hexen 2018 disk. Very strange...

    It happens to me too,but sometimes it will add extra space to the drives. Dont know whymbut it works,just not always. Keep trying. Try removing space from C first,then add to E

  5. 6 minutes ago, Uraeus said:

    The thing is that I can't make it bigger using xbpartitioner 1.3. It allows me to make it smaller, but not bigger than the standard size. That's why I was asking how to do it, because it doesn't allow me by default...

    You can do it,just try all buttons,i cant remember wich does the trick

  6. 1 hour ago, TEK Nemesis said:

    OK...  Now we can see the problem.  Go back up to that row.  Cycle A button until it reads the same details for that partition.  Press Start button.  Once complete, press White button until it says just Format at the top.  Press Start button.  Press White button until it says just Write Table.  Press Start button.  Then, press Back button to exit.  Reboot.  Go back into XBpartitioner 1.3 and keep doing this until it no longer says ER.

    What does ER stands for?

  7. 19 hours ago, Uraeus said:

    I'm trying to install all the DLC available in my E Partition but they don't fit. Is it possible to make the E partition larger? It is ok if it involves losing data or reformatting the hard drive. I have an Xbox 1.1 TSOP with iND BiOS and 2Tb HDD. How can I make partition E to be 10-12Gb?

    I have done something similar before. I made the C drive smaller,because i only used half of its space,i also made larger XYZ drives to have less formats on them every time they fill,but i run into problems when i did that. The xbox wouldnt load the dash in every boot,it would sometimes refuse to launch some games.it would sometimes loose files in the modified drives and other problems i dont remeber(did this 10+ years ago). You can definately do it with xbpartitioner and i would encourage you doing this since youdont have anything to loose,because you said its ok to format the drive

  8. On 5/8/2019 at 2:57 AM, TEK Nemesis said:

    Can you take a photo of XBpartitioner 1.3 immediately after you launch the app?  Ensure that the focus is moved off the F drive so that we can fully see the what the F partition is indicating.

    This is what i see. What i notice is that it says LBA48 patch v16 while in others i see it reads v3. What excactly is this?

    IMG_20190509_234619.jpg

  9. 5 hours ago, TEK Nemesis said:

    This is what you wanted though, right?  So, when you set it to that, write the table and then reboot, what is the outcome now?

    So after that i start filling the F drive with games emulators etc,but when the free space drops to 30-32GB,no more filles can be copied into that drive. Others drives can be filled to maximum,but this one cant. Tried that on 2 xboxes with same Bios and the same problem occurs,so i assume that its a bios problem

  10. 1 hour ago, KaosEngineer said:

    What's the main screen of XBpartitioner v1.3 look like?  post a pic showing your Xbox's  HDD settings.

    What is the size of the F drive?  What cluster size is being used?

    Its excactly like the one you posted. The top partitions are the same and F drive gets 290GB and formats with 32K cluster size

  11. 10 hours ago, TEK Nemesis said:

    Did you cycle through the partition setups by pressing the A button?

    I first made ALL of the partitions(XYZCEF) 0 bytes,so the app will format all of them,then i did cycle with A button until all space goes to F and then it reformated the HDD but still no luck. I quess its something with the bios? Maybe 5003 is better at this point?

  12. On 3/23/2019 at 11:41 PM, neighbor said:

    So, I've done this, connected a potentiometter between Vcc and OCSET, gone from 1000ohm down to 50ohm, the Xbox powering on, but shown no picture on the screen, and there was kind of clicking noise going from motherboard. Between VDD and VSS(gnd) on RAM chips, still 3.06volts. So no boot and no voltage increase. Any thoughts?

    OCSET Xbox RAM voltage controller overcurrent.jpg

    ocset pin.jpg

    After removing the potentiometer, everything was fine.

    If you want to overvolt,i know an easier method. In some xboxes,their psu have  a potensiometer on their front side. If you turn it clockwise,it will raise the voltage in ALL the lines(12v,5v,3.3v). If you are lucky enough,you will have a psu with adjustable voltages :D

  13. Hello everyone. I have a question. Can i use only F partition on a 67 Bios? I am asking this because i am using ind-5004 bios and it was fine as far as i had F and G. Recently i decided to make just 1 F partition. I loaded xbpartitioner 1.1 and create a single 290 GB partition for F(it was 120 F and 170 G before) and after that i started loading stuff in it. The problem is that after the free space went to 32-35 GB(dont remember excactly)no new files would be writen on the F partition. The other partitions would get files normally. If i delete something on the F,then it would accept files again until it reaches the free space limit.... Am i doing anything wrong or is the bios supposed to work only with G too?

  14. 7 hours ago, Crazyembereks said:

    Or if can't boot that, could also split the 1mb TSOP with a switch and have 2 banks in the TSOP. This way can avoid the modchip altogether? Would this work?

    yea that would also work,but why take the risk?aladdin chips cost around 5 euros,thats nothing

  15. 9 hours ago, Gray1 said:

    OK. Cool.. I will go with the iND-BIOS 5004 F&G. Might as well give it a whirl. Long as it supports 2 terabytes.  I have ordered that Bare Electric Conductive Paint. Gonna try that too. Used the "Printed Circuit Pen" but it didn't work to well for me. Sometimes it worked most of the time it didn't and I still found myself soldering.  Thanks Guys

    If you are planing on the TSOP,i believe you will not want to flash it with evox dash since its tsop brand is winbond(i believe)because my 1.2 have this type of chip nad wouldnt flash from evox dash

  16. On 2/26/2018 at 5:20 PM, Tim Mcmurphy said:

    Project Gotham Racing

    I was surprised how good it actually looks for a release title. I really enjoy the handling and the kudos System. Definetly can recommend it while playing it right now.

    I really melt myself playing project gotham racing 2. I sometimes find people on xlink kai and play online too. I dont know why but i like it more than forza(even if forza is more realistic)

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.