-
Posts
288 -
Joined
-
Last visited
-
Days Won
25
Content Type
Profiles
Forums
Calendar
Store
Everything posted by ShinGoutetsu
-
Sorry I just don't have the time to build them for others
-
It is quite a lot of cost and work, soldering will be required too. This will likely put a lot of people off
-
- The breakaway part of the controller cord is used for controller ports 2 and 3, it also has an internal 2 player ogx360. - A Star-tech ide2sata adapter and a 2.5" HDD - a short SATA cable - a Xerc2 for power on/off (or) a round momentary push button (2 pole) for power on/off - an OLED compatible xenium based modchip - 1 or 2 Newhaven NHD-0420-AX3 OLED displays depending on case version (the X denotes the oled colour, i.e: AB3 is blue, AG3 is green etc.) - a 160-xt PicoPSU and AC adapter - an Atx2xbox adapter (search for it on dirtypcbs.com, version 1.6 is not supported) - 2 x TITAN VGA heatsinks and fans (although i am working on a better cooling solution) - installation of a second fan header if not already present - a 3mm bicolour led for power status, 2 x 3mm led for LAN and HDD activity LED's - optional rear 40mm fan for the single OLED version case design - I recommend a small heatsink for the MPCX and potential removal of some of the start up capacitors depending on motherboard revision - Of course a 3D printer capable of printing this (case dimensions 210mm x 240mm x 50mm) I recommend at very least PETG but ABS is better for printing this, i printed at 100% infill but you could reduce this a bit
-
some images of the dual oled case which is printed in 2 main parts (top and base) with the IR eye holder and top back edge being much smaller parts. The one pictured also has a 3mm thick laser cut acrylic/perspex faceplate. The second design is printed in just 2 main parts with an IR eye or push button holder (either can be used) The button required is a round 10mm momentary pushbutton or you can use a Xerc2 to turn the xbox on/off via the official dvd remote control
-
maybe with a resin printer, I only have an FDM printer
-
Both versions external links here: Final Dec 22 2 part xbox mini (mediafire.com) Final Dec 22 2 OLED xbox mini (mediafire.com)
-
The completed xbox mini files are here:
-
Of course, it was just an example. I can easily add a USB port but I see no need for the buttons unless they would have a purpose with this modchip. We will have to wait and see what additional features are supported by the front panel connector I suppose.
-
I could probably come up with something custom that might work, maybe similar to this
-
Still needs a lot of work
- 50 replies
-
- 1
-
- full
- replacement
-
(and 2 more)
Tagged with:
-
I wish i could just do this, xdk height but there's no way i can afford the mold costs Sorry for the low quality image, max 2mb attachments
- 50 replies
-
- full
- replacement
-
(and 2 more)
Tagged with:
-
Rough idea, may go in an entirely different direction though as I'm not very happy with it
- 50 replies
-
- 3
-
- full
- replacement
-
(and 2 more)
Tagged with:
-
Managed to get my order in a few hours ago, £140 at 8bitmods in the UK. Once I get it I'll do a review
-
Looks pretty cool and has an sd card slot to load bios files from. Usb type c for updating it and an on board oled display. Also pinheader pass through, rgb led connection points... lots of features.
-
Thoughts? Looks very interesting https://makemhz.com/blogs/news/announcing-project-stellar-plus-more
-
https://www.etsy.com/uk/shop/OledOXModShop Try messaging him, I don't know if he still makes them though. He's a friend on fb so I could get hold of him if you have no luck
- 50 replies
-
- full
- replacement
-
(and 2 more)
Tagged with:
-
- 50 replies
-
- 2
-
- full
- replacement
-
(and 2 more)
Tagged with:
-
- 50 replies
-
- 1
-
- full
- replacement
-
(and 2 more)
Tagged with:
-
For those wanting to maybe create their own case design here is my mount hole template. AV port at the top. It's pretty close so may help
- 50 replies
-
- 2
-
- full
- replacement
-
(and 2 more)
Tagged with:
-
I don't have a lot of time at the moment due to my job but I do a bit more here and there when I get chance.
- 50 replies
-
- 1
-
- full
- replacement
-
(and 2 more)
Tagged with:
-
Did a bit more work on the mainboard 3d model
- 50 replies
-
- full
- replacement
-
(and 2 more)
Tagged with:
-
printed the base in one piece (with lots of supports). Unfortunately the sides were very brittle with this filament and it didn't help printing at 20% infill. Will try again at higher infill and non silk petg filament
-
I will share the case files once I'm completely happy with them, I won't be sharing any of the internal xbox part 3d models though
-
Thanks guys, will update once I'm back from working away. So far from the feedback I think I'll be doing an xdk height case with jewel, reminiscent of the original case but with some more modern style cues. I'm also thinking of a removable rear panel that can either have the outputs that have been requested or blanked off (two separate plates). I may raise the hdd and dvd rom trays/brackets to allow more space below for ogx360's and other mods, however that would require a longer IDE cable and possibly extensions for the hdd/dvd rom power. Another option is to have the ogx360 above the dvd rom. There will be at least one front usb port and I'll do an lcd version and a non lcd version of the case.
- 50 replies
-
- 1
-
- full
- replacement
-
(and 2 more)
Tagged with:
-
I would perhaps one day share the hdd tray, we will see. Anyway I've added the hdd tray to the rest, just need to finish the dvd drive bracket and I can start developing the case
- 50 replies
-
- 2
-
- full
- replacement
-
(and 2 more)
Tagged with:
Board Life Status
Board startup date: April 23, 2017 12:45:48