SS_Dave
-
Posts
4,719 -
Joined
-
Last visited
-
Days Won
268
Content Type
Profiles
Forums
Calendar
Store
Posts posted by SS_Dave
-
-
just so you are aware that soldering a 1mm X .5mm component is not easy for learners.
It may be easyer to get a resistor that's got leads and use that.
I can post some pics on that later.
-
1
-
-
You need CHP0603 size approx 1mm long
-
1
-
-
If you where in Aus I would have posted you one or two.
-
1
-
-
34 minutes ago, elbastardson said:
Any suggestion as to where to find one? In my search I see a bunch of 10k resistors but all the ones I see are =/-5%.
That will work.
Shops around here won't sell 1 the smallest pack is 8 and sells for whopping 0.55c
You only need the small wattage 1/8 watt or less type but what ever you can get will work.
What country are you in?
SS Dave
-
1
-
-
Hi flux_no
Sorry to say but I got one of those HDMI adaptors from aliexpress and I think it's a piece of crap the vidieo signal is all-ways swapping 480,720 50hz,60hz ect tested on 3 diferant Xbox's. So in the junk box it when't. The pound version was ok but had the occasional frezing/glitching on one of my Xbox's and with a bit of reading showed that a version 1.4 I think had some issues.
If you can send it back and get a refund do it or get one of the Wii2hdmi adaptors and use the Xbox Avip plug and lead from it and make your own.
Cheers
SS Dave
-
Yes you can use any 10k ohm resistor I would get the smallest size and lowest tolerance 1% or less.
-
1
-
-
Looks like you could remove the spring contacts and fit a connector and solder direct to PCB
The pin on the right is proberly D0 point.
Thats about all I could find easly.
Hope it helps
Cheers
SS Dave
-
I think xecuter 2.2 lite as the 2.3 lite was a blue PCB or xecuter 2.2 lite plus
SS Dave
-
Any other damage ?
-
It appears R7D2 is missing it sould be a 10K resistor.
Replace that 1st and then see if it works ok then we will talk about fixing the rest.
Cheers
SS Dave
-
My english is not the good either and it's my native language thats why spell check is around.
I think the kit he has this time includes a perspect case and leads the add states 4 player it might be worth contacting him as he used to do two player and it would be cheaper.
If you have post probplems I could post from australia for you also if you can't find a 360 wireless controler and or reciver let me know..
The video is ver 2 and I am working on a 4 player one that could do the same as the video as well as still use a xbox wired control in say port 2 or 3 and retain the DVD reciver in any port 2,3,4 if wanted. That means you can mix the controlers. I plan for it to be plugin internally so no mods at all the Xbox and could be removed with no trace so no holes in case no cut wires that way the box looks untouched.
I will let you know when i get further with it.
Cheers
Dave
Ps we have a heat wave tonight only 1deg
-
1
-
-
Hi hector
Here is a link from RYZEE119 he is makeing a new batch with case and cables.
https://www.etsy.com/au/Ryzee119/listing/682458413/preorder-ogx360-4-player-support-with
If you get stuck the 2nd hand shops here have genuine 360 controlers the reciver from eBay.
The kit i am working on is a internal version.
like this.
Dave
-
Hi Hector
So you want some thing like this.
As I don't use it I may be persuaded to sell it.
I have no idea what it's worth.
Whats the ZIP code of where you live and I will lookup post then we can talk money.
Unless you want to wait a bit longer as I am working on a plug in Ryzee119's OG360 interface to work with a Xbox 360 wireless controler.
Cheers
Dave
-
1
-
-
More info please like model of xbox.
Some pics of the install would not hurt either.
Cheers
SS Dave
-
Yes it has 3/4 size Pool table, Pinball machine ,Xbox on small tv in the corner and a poker machine that needs a lot of work to get going that will be a one day job. and toasty warm with a wood fire. Today it's what locals call cold currently 9 degrees celsius with tonight set for -3 degrees.
Cheers
Dave
-
1
-
-
Hi Hector
I am also a ham radio orerator and that power supply generates interferance on the frequencies I use there by drowing out the stations I am trying to hear..
Would be better than the transformer but it's not version 1.6 conpatable and it proberly interfear with any AM radios in the house as well.
It's a cheap after market unit as there is no brand name on it.
I purchased a upgraded mother board (CPU and Ram) from N64 as well as his HDMI output kits 2 differant transactions and both times he packed the items very well. Just give him some time you will get it.
I really should get around to doing something with the motherboard one day plans for that one are a stand up arcade machine for the pool room.
Cheers
Dave
-
Yes the power supply is a universal one that suits version 1 to 1.5 only. It was in a Xbox I got cheap as the box had a dud hard disk.
While it works the interferance on my HF radio is horrendous when it's in use it's even worse than a CHEAP switch mode wall wart style power supply and some of them are bad. I mean up to 7 S piont's of background noise.
And yes i know he was getting his post count up to download somthing.
Cheers
SS Dave
-
7 hours ago, Mindaugas Petronis said:
if you haven't read this thread carefully, he lives in argentina, where tv standart is ntsc but sockets output 220 volts instead of 110, and he needed ntsc xbox. all ntsc xboxes are meant for america, which means they all have 110 volt psu, unless you replace it. he also said that he could have just bought a pal xbox and it would have 220 volt psu built in, but it has pal standart instead of ntsc and he could have had saved some money by buying pal xbox and then using that app to switch from pal to ntsc.
Mindaugas Petronis YES I have read the it!
The PSU( Power Supply Unit) is the smaller board to the side that converts either 110 volt AC or 220 volt AC to the required DC voltages the xbox requires to operate. He also has the Xbox working put the problem is the power converter that converts from 110volts AC to 220volts AC makes too much noise that why he want to change it.
So what he is looking for is this to suit his Xbox verison 1.6
Would you care to explain this Xbox power supply then.
This one has a input select switch for 110-120 and 220-260 so it could be sold world wide as a replacement power supply. so it would work on US,JAP,AUS,EURO and anywhere else that hap Xbox's.
In his 1st post he has a picture of what he wants and that item has nothing to do with NTSC or PAL only the input voltage.
I see you are just getting your post count up to download something.
SS Dave
-
Hi Hector
For your info I just loaded Splinter Cell on a Xbox that is using RYZEE119's OG360 interface and had no delay like i did with the wired control even did a hot swap between the 2 and the 360 wireless control worked a dream as it seamed to respond well.
Cheers
SS Dave
-
That explains it maybe there is a controller calabration option in the game.
Cheers
SS Dave
-
Hi bigted1977
Your spring Chicken
Enjoy you stay here and feel free to ask questions and hopefully you get some answers to assist you
Cheers
SS Dave
-
To be safe I would do both folders
Although it does look like the save is only the UDATA folder.
-
1
-
-
Maybe the it's the fact that the Xbox is modded with any mod.
The test would be to try on a autouched xbox with your controller.
May be try a differant controller as I found I had problem between 2 genuine controls one small one large on Splinter Cell just then.
-
I belive that the game saves are stored on E Drive but cant rember if in the TDATA or UDATA folders. Copy Both and save to new drive and you should be good. You could copy to a memory card and transfrer back to new drive that way as well.
SS Dave
Board Life Status
Board startup date: April 23, 2017 12:45:48
Lifted Traces? Red and Green Flashing Led.
in TSOP Flashing
Posted
Have a look at component R7C8 to the left of the missing resistor it the same size not the same value.