big F
-
Posts
418 -
Joined
-
Last visited
-
Days Won
14
Content Type
Profiles
Forums
Calendar
Store
Posts posted by big F
-
-
On 30 November 2018 at 10:15 PM, wikati said:
i have 128, its not rave worthy. but its a bit better.
it also unlocks the sega chihiro games (meh)
I GUESS emulation is better... but not really? there are more games available to 128 boxes, arcade games mainly (i say mainly, but i think its only arcade).
on a side note, i would really love to see a "128mb only" rom list/downloadable pack, would be nice.A 128 only list would get my vote.
Emulation is the only real reason to mem upgrade these days.
How many of us use them seriously for media playback now with HD and TVs that support network payback.
-
Thanks for sharing this.
-
Some of the convertor cards will only run with an 80 wire cable.
-
Given up waiting for one of my suppliers to get stock of my missing components from the order I placed so gonna reorder elsewhere.
To cap it all my delivery of wireless connectors has disappeared, tracking stops at Heathrow airport mail sorting. That was 3 weeks ago. Gotta wait another week till I can claim on my insurer for the loss. Then I have to reorder.
-
7 hours ago, KaosEngineer said:
You need to make this so called DVD Simulator jumper to plug into the motherboar's DVD power connector to pull HIGH the CD_RDY and TRAY_IN signals routed to the SMC so it knows the drive is ready.
Here's one such plug I found at xbmc4xbox.org.uk - https://www.xbmc4xbox.org.uk/forum/viewtopic.php?f=13&t=373#p13212
However, instead of a wire to directly connect from 5V to B and 5V to D, I would use a 10KOhm resistor.
Thats the ticket, agreed giving it a load rather than a direct short was the one bit I remembered.
-
I have a Xenium Ice without all the LCD bits and bobs.
Ive been looking at some SPI capable LCDs. Back in the day SPI was expensive, but now with the likes of Aliexpress etc there are now cheaper options. Might get one or two of the smaller ones that are cheaper than the full size, needed/desired to test out things.
-
1
-
-
I had the pin out details with what to do to properly eliminate the DVD and not get the boot stutter.
cant find the details
-
The cooler the better from the chips point of view. But yes 60c is not that much.
I fancied doing an LC OGXbox just because, that should run nicely cool.
-
This is a great idea and I would love to make one / win one.
I have several screens just begging for this treatment.
pyjama pants are a must when modding
-
Epic work there.
Always wanted to play that game after a friend bought it when it came out.
Now making a modern controller system for it is in our grasp.
A pc hotas setup would be a great starting point imo.
-
1
-
-
41 minutes ago, Ryzee119 said:
@big F That white
, just need matching Arduino modules somehow
Yeah that would be awesome. I’m unsure why this has never been an option already. For the price that you can buy them at the likes of AliExpress. They mint them out on panels dozens at a time. It wouldn’t cost anymore.
The couple of companies I use for board fabbing don’t really care what colour you want the board finished in, they are more interested in Gold finishing or assembling it for you.
There is IMO a whole market there for coloured boards, it’s only laminate lacquer after all.
I can go to the local DIY store with a piece of cloth, soil or what ever and they can match it and make me some paint, so why not with pcbs etc.
-
1
-
-
Well here are my boards patiently waiting the delivery of the components. May well start the mock up process without them though since I can calculate the size with everything soldered on. Plus no worries for static on an empty board.
They are white as the rest of my order is also white. It should look great in my clear Xbox
-
4
-
-
Nicely done.
Once I get my workshop straight Im planning to start the internal solution, with 3D printed bits where needed.
The boards came back from the fabricators bundled up with my boards for my Amiga project days ago.....
Still waiting on some components for the build. The pain is, some for the board are here but nothing I can install with out causing problems later, same goes for the Amiga boards.
-
2
-
-
I am currently waiting on delivery of my boards got most of the components ready. I only got enough fabbed so my boxes and a friends can have this mod.
my plan is to see if i can make a solution to add it internally, hoping to be able to provide a 3d printable bracket type thing. Hopefully i wont need to use dollops of hot glue instead.
-
1
-
-
So totally depends on what you do with your XBox. I have several, all with different tasks and with that different sized drives. One has every one of my games saved to the drive, no neec to bother getting the disks out. It also has my emulators and all the roms and disks for them. Its drive is full and I could add more to it.
I have one that plays media and had loads of dvds on it, it has two 320gb drives.
I have several with rather small drives just bigger than the factory 10gb and a couple with 10gb drives.
With most people here it really boils down to something like above or just that because you can.
Its the same reason I mess with 30 year old Amigas, getting them to do stuff that was eaither physically imposible or astronomically expensive back in 1989.
-
Should be easy enough to fit it and a de-cased receiver inside, that’s the way I’m going to go.
the less messy wires the better imo
-
2
-
-
For an internal version you could just attach the usb’s Directly to the controller header cables, this would render the ports obsolete but who cares when you have wireless controllers.
I intend to do it to two and leave the others factory, I never play with more than two players, that way anything funky or DVD dongle etc can still get plugged in.
-
1
-
-
I have one of the Logitech controllers, and while I like the feel of it, you cant get away from the fact that they are no longer made and dont seem to have ever been made in high quantities, and sell for silly money, on the likes of eVilBay.
much better to have an actual Xbox 360 one that was mass produced to the point where they can now be picked up cheap at second hand stores for next to nothing as nobody wants one.
Ironically they were made by Logitech.
Im interested in one of these boards.
Im thinking one of those inside an OG with two controllers, is a winner
-
My ones that I have checked all seem to fit between 40 and 60 on idle. Seems to be the norm. I wonder if water cooling would be any better.
-
Those Pico psu's are so great in mods both PC and Xbox.
Before they became mainstream afordable I was using busted Xbox 360 psu s, gutting them and putting OGXbox PSU's inside. Now you dont neec to and the results are so much cleaner.
PS I love the flag, because its on top of the General Lee and my old Evil Kanevel toy.
-
On 24 December 2018 at 3:11 AM, IPTDF00 said:
I have kept an eye on this topic as I would rather save a few bucks on the "mass production" machines I build and use the cheap adapter. And at this point I am not worried about failure and in these use cases, not worried about performance either. But, I don't want to lather it up with liquid electrical tape as thats just not good form to me.
So, here is my discovery. I stumbled this design and wondered why i hadn't thought of this before.
Nice, looks like I might have to get printing some of these.
Seeing as Pata drives are like hens teeth with any decent capacity and, usually used and over priced, its Sata for the win IMO.
-
I have in the past used rounded cables, both home made and shop bought. Its tight but you can get them in with the case closed.
I bought a few a year or so ago from a retail shop who wanted rid of this old stock that he was thinking of putting in the trash. £1 each..... Bargain.
-
Yes this is the best place for OG Xbox, everyone here is still modding the ole boxs and still will years from now.
-
Hey welcome aboard.
Board Life Status
Board startup date: April 23, 2017 12:45:48
Steel Battalion Controller Converter
in Hardware Mods
Posted
Bought a chat pad just for this game