Bigtime

I thought FRAG was flashing red and green at any point. Mine would load up the Cerbios boot screen then the console starts flashing green and red but screen would stay black. I did get it to work in case anyone finds this helpful. I'm pretty sure I wasn't setting up the new HDD correctly or forgetting certain files for the desired dashboard. I reformatted the HDD with FatX but I preloaded the C and E drives with Hazeno's zip files. I followed his tutorial on his website https://www.hazeno.com/home/hdd-upgrade-2tb-and-under . Once this was done I plugged in the HDD and booted the Cerbios BIOS previously flashed via OX OS, everything worked great. While I'm more of a tinkerer than a modder I appreciate the help OGXbox has provided while I researched. It's nice to see everyone helping out other people who have issues with their install that are not as knowledgeable, not just this forum but almost any modding forum or source. Thanks! AND big thanks to all the people who created, support, and continue to create new stuff for the scene.

So, I flashed the Cerbios bios (UDMA5 256K) via the OX OS and it flashed fine. However, now it loads Cerbios boot screen then FRAGs with a blank screen. Is it possible the HDD is not configured correctly? Maybe something with the HDMI adapter( I'm using? I replaced the HDD with a 500GB SATA, star tech adapter, and 80wire cable. EvoX and the retail bios still boot up correctly.....so far. Any thoughts?

I see, so basically flash the chip the same way I flashed it with EvoX M8 but use Cerbios. I was under the impression that OGXbox Cerbios disc was a kind of one stop shop when setting up a modded OG Xbox and would reduce the chance of bricking something.

Microsoft Duke Controller

Forgive me if this is the wrong thread feel free to move it accordingly I recently installed an OpenXenium mod chip on my 1.0 xbox and successfully flashed Evox M8+ via some online tutorials, it all went smooth. However, I ran into some issues while trying to flash the mod chip with Cerbios via the OGXbox Cerbios disc 2.3.2. Here is what I did: 1. Installed OpenXenium mod chip 2. Flashed Evox M8+ bios 3. Installed 500GB Sata HDD with Startec adapter and 80 wire cable 4. Used OGXbox Cerbios disc to run XB partioner and split most of the space between partition 1 and 6 5. Used OGXbox Cerbios disc to attempt to flash Cerbios UDMA5 256kb to the chip using Xblastos, Evox, and Gentoox (separately). Xblast wouldn't respond to the LT, RT, Start, White confirmation screen. EvoX showed "Manufactures id 09 device id 00 flash not writable, erased". Gentoox simply said "flash failed". What step am I missing? The OpenXenium chip purchased has the Make MHZ logo instead of teamexodus on the boot up screen if that makes a difference.