ISAK.M

I was going to quote u to show what they looked like but forgot so it just became a normal post. Alright ordering that then.

Oh actually shipping costs a fortune if I would buy from that site so tell me if one of these are good instead: https://www.electrokit.com/produkt/upw0j332mhd-3300uf-6-3v-105c-o12-5x25/ https://www.elfa.se/sv/radiell-elektrolytkondensator-3300uf-207-9ua-3v-02a-panasonic-eca0jm332/p/16725604?trackQuery=cat-DNAV_PL_03020103&pos=649&origPos=3&origPageSize=50&track=true&filterapplied=filter_Kapacitans%7E%7EuF%3D3300%26filter_M%C3%A4rksp%C3%A4nning DC%7E%7EV%3D6.3 https://www.elfa.se/sv/radiell-elektrolytkondensator-3300uf-207-9ua-3v-18a-panasonic-eeufs0j332/p/30108269?trackQuery=cat-DNAV_PL_03020103&pos=662&origPos=4&origPageSize=50&track=true&filterapplied=filter_Kapacitans%7E%7EuF%3D3300%26filter_M%C3%A4rksp%C3%A4nning DC%7E%7EV%3D6.3

Would 5 of this one work: https://www.digikey.se/en/products/detail/panasonic-electronic-components/EEU-FS0J332/7381215

So if I replace those it will boot? How can u tell they are bad just from this slight buldging? I guess these caps are supercheap so there is no reason not to replace them all too? If not how do I go about measuring each to see which one is faulty?

It looks like this: https://imgur.com/a/EjSsplZ

Well I could just get another Xbox for that price to be completely honest. I do have a 1.4 PSU that is known working, is there any way of using a 1.4 PSU in a 1.6?

I just picked up a 1.6 Xbox and it does not turn on. Whenever I hit the power button there is 3.3V, 5V and 12V all present for about 1 second then nothing. All standby voltages are good too. Idk whats wrong.

One side is grounded and the other side shows 0.17V The resistance is 9.85K ohm so basically 10K

R7D9 shows 0.17V so I guess I need a new 10K ohm SMD resistor?

Nvm R7D10 is for write access to the TSOP I forgot that

https://imgur.com/a/3NAcfiH I found a random blob of solder that I dont remember putting there that was shorting 2 points so I managed to sort of melt and scrape it off so thats not shorting anymore. I did also find that R7D10 also shows 0.17V. This part has solder points aswell and I dont remember what I was doing here its so random. Its not connecting tho so something else is forcing R7D10 to be 0.17V

Well yeah its 0.17V no matter what, except not always. I measured what it is during those 2 first boots before it reboots a 3rd time and then just sits there. 1st boot: 2.2V 2nd boot: 3.3V 3rd boot: 0.17V So something just makes it instantly dip down to 0.17 but idk what it is

The problem is I cant desolder it as I dont have a desoldering braid

https://legacy.downloads.diomtec.com/homebrew/xbins/Console%20Based%20Applications/bios/evolution-x/_v1.1/ I rushed things and flashed this

I should add that even the via that is connected to pin 5 also shows 0.17V Like there is a bigger issue other then my soldering here