amxcs
-
Posts
22 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Store
Posts posted by amxcs
-
-
It might be
It just didn't seem normal to me that the letters 3 out of 4 chips were in a different font and very poor quality, only one of them was 1:1 like the one on the console. I ordered them from here.
I forgot to take pictures of the solder joints, and I can't take the console apart now just because of that. But here is a picture of another chip that I soldered today. My solder joints always look like this...
-
Hmmm, the problem isn't my soldering. The solder joints are more than perfect. No bridges between the pins - checked both with a microscope and a multimeter.
2 out of 4 chips are not working. I tried the non-working ones on another motherboard and they don't work there. The other two were successful the first time.I ordered more chips.
It would have been easier to get the chips from another motherboard instead of dealing with these Chinese fake chips.
-
I flashed the bios. First chip (bank 1) - successful.
The next one, which is bank 4 - failed.
Does the order of chip banks matter? Were they supposed to be in the order 1,2,3,4 bank? -
Thanks. So the ram chip might not be dead..
Where can I download it from?
-
Ok, I read elsewhere that cerbios supports 128MB RAM.
Can I flash xblast with OGXBox Installer 2021?
Xblast is bios right? Because I can't find it anywhere to download it?
-
With cerebios 2.3.1 can it boot? Because after I soldered the first chip - FRAG. The chip is soldered more than perfectly, there are no bridges between the legs, so the problem shouldn't be the soldering?
Only 14 and 15pin (VDD&VDDQ) short, I read somewhere that it's normal?
-
Hello, I have bought chips for this mod. I want to ask if after putting the chips 1 by 1 it is possible to test if it is soldered well or do they all have to be soldered?
-
I made a PCB. Single-layer homemade.
I am attaching the file (Sprint Layout) if anyone wants to make it.
-
3
-
-
What is the difference?
What is the other chip on the aladdin board - LC4032V?
-
Thanks!
-
18 hours ago, KaosEngineer said:
The Flash BIOS menu option is in the Advanced menu to the right.
I put in a hard drive, but again there are no options other than to boot a linux disk.
Anyway, I hot swapped the chip onto another modchip console and flashed it.
Thanks everyone for your help.16 hours ago, Bowlsnapper said:So please do not add a softmod file structure to your HDD. I don't even know how that would be done since you have no HDD and can't run the softmod installer anyway. A new HDD would be blank.
Now to ask, I found an old hard drive that was in the xbox and it was locked (forgot to unlock it). I keep the EEPROM or HDD key. Is there a way to unlock it without a computer - in the modchip console?
-
1 hour ago, herooftheday said:
would it boot xblast or gentoox from a cd?
I tried with OGXBox Installer and TruHeXEn 2021 - No boot
41 minutes ago, KaosEngineer said:Is there no other menu displayed before the first screenshot you posted?
Press the Back button. Does a different menu appear?
If not, install an empty hard drive. What happens?
I have already removed the chip and read the EEPROM with the RaspberryPi to prepare a hard drive with the HDD key.
I remembered that I have the chipmod console in the ceiling from many years ago. Now I got it, opened it, looked closely and it has the exact same chip and connected in the same way 1:1.
When I start it under the XBOX logo it says XECUTER2.
Can I hot swap the chips while it's running and flash the other one? -
I'm thinking of removing the chip, softmod (rev 1.1) and then flashing the original bios (TSOP). Which bios will you recommend me? Cerbios?
-
I searched too and can't find anything
Maybe it's just because I haven't dealt with xbox extensively, just soft mod one time 1 year ago and haven't touched it since.
If I remove the chip, softmod and then put the chip back in can I flash it?EDIT: Maybe this? But I will need to connect a keyboard.
I also have no idea which distro to use.
-
Is there a (video) tutorial on how to do it.
I want to update the bios, put in a big hard drive and install whatever is needed. -
I was given an xbox without a hard drive, when I turn it on, this screen appears.
I'll buy hard drive. What else do I need to do to get it working again?
-
Thanks, done with bootable usb flash.
I unlock, wipe partition table, then make now XBox HD from scratch and lock.
-
1
-
-
How to unlock hdd without xbox. I dumped eeprom with raspberry pi 4.
-
Hello again,
I made a copy of C and E, but XPlorer360 crashed and then Partition 4 (E) disappeared. I will be grateful for advice on how to restore it and also Drag & Drop from Windows Explorer does not work with XPlorer360. I will need some other way to upload the files to disk. -
I watched this video, the procedure suits me. It seems easier to me than original disks and adapters.
My kernel is:
K:1.00.5838.01
D:1.00.5960.01
In 2022, is the procedure still relevant?
Until 8:00 min from video - to make a hoswap and put Ndure3.1 to HDD.After that AID4.54 and TruHeXEn 2021?
-
Hi, I only have a working console and controller. Which is the best option for hacking. I saw in several places that it can with an original game and an adapter for usb drive, but if I don't have any other options? I have old computers with an IDE connector if needed.
I've hacked a lot of consoles, XBOX360, their DVDs drive (with drilling), PS1-4 and I have an idea of how things are.
Board Life Status
Board startup date: April 23, 2017 12:45:48
Xbox 1.1 128MB RAM Upgrade
in Hardware Mods
Posted
The new chips have arrived. I soldered two more and now everything is fine. Successful from the first time.
Apparently I'm the first one who was sent fake chips
Here is a picture of the faulty chips (left) and the new ones (right). The font is different and the letters are erased by acetone.
I want to ask with 128 MB of RAM, can there be incompatibility with any game?
I'm asking if I should replace my main console with it or just use it for special patched games.