christopolis

i've already gone way past that part, tsop chip was bad on the board, took one off a donor board and flashed with 4034 then soldered donor chip to console, boots fine now, the main thing i was trying to figure out was what bios was on the donor chip since it didn't match kernel 4034, turns out it was x2 4977, must have flashed the tsop with my openxenium by accident on that console cause i don't do tsop flashes i only install modchips

just checked the md5 hash and it matches x2 4977 which is weird i guess at some point i must have accidentally flashed the tsop on the donor console with my openxenium because i only install modchips and do not tsop flash, and i believe that console was stock when i initially got it

i have a skeleton black that would not boot from the tsop (was never opened so just the tsop went bad). i stuck it in my t48 programmer and it gives me pin detect errors, so i took a tsop off of a parts 1.1 and sure enough it reads without issue, i was comparing the k4034 image on the chip to other 4034 images and it is slightly different, just want to know if it is infact the stock 4034 kernel on the chip or if it is some other bios on it. i've attached the dump from the donor chip [email protected]

okay i just took a chip off a parts 1.1 and was able to read that no problem so it must just be the chip itself that is bad

did you ever get the tsop to program correctly, i've got a skeleton black with a bad tsop and i can't get xgpro to read it, having the same issue with pin detect error when that option is checked but when everything is unselected and read it comes up completely blank

do you still have either halo controller? i've got a halo console with no controller for it