sh0rtlife

so remote x shows f/g, xbp shows f/g, ftp only shows f......xbp is showing both parts as 64 and no "ER"...ive refreshed ftp, ive loggeed out and back into it and no g...ive done everything short of rebooting the pc...rebooted xbox included intresting tho..if i browse the file system thru xbmc i see f 1043.7 and g is blank

with the partitioner it has an option "cycle thru standard setups which has an option for 1020f 1020g...not sure if thats ok to use or not tho

ive been using this as a referance and im assuming its the hexdec of 73f8ff00 thats most important ?

done..and thanx a ton for that im guessing the flash protect can get turned back on now, lets see if i can get g to register....

ahh here we go, with flash protect off man id 01 device id d5 flash type amd- am29f0r0b

totaly stupid question..but...with the 2.6 its got the 3 dip switch front, well technicaly 4 chip enable off/on(on) flash protect on/off(on) bank 1/2 (2) and the led switch....i need to turn flash protect off dont i LOL but do i need to switch the bank?

manufacturers ID09 device ID 00 !! flash not writeable

i have no idea or even a clue as to how to check i worked some magic and got an xbmc dashboard on c, so i could partition f/g which i did...ftp shows no g......

yeah thats kinda the problem

oh sure ftp is a no brainer, but ive only been able to get that far with everything on F while its 2tb......i feel like im missing a step

ill run xbmc and "try" to roll its apearance back to the way it "was"....not sure its possible but thats my plan..either way xbmc makes sense to me so id like to stick with it...if i can get an installed os long enough to format f/g to do it

i tryed, but then it wouldnt boot so in went slayer again which undid the partitions......whoever built the slayer setup should have addid the ability to pick your format sizes..it would have solved everything ive re-done the partitions and slayer multiple times now...i can either have it working with a 2tb f or a non booting 927f and 927g so im clearly noobing something some consoles are soooooo simple while others just feel like a can of worms compounded by other things, i figured doing this ole girl would have been easy....now im kinda afraid to tackle the 360 and ps3 on the bench......the ps2 and wii were walks in the park by comparision ..now the wii i setup for my dissabled mother was ...a challange but nothing like this

so should i dump the remainder onto h? ugh ok so trying to get the partions done and use slayer is proving to be....tricky since it keeps killing G and forcing the full 2tb to f should i just use the option new install full rebuild "retail" hdd?

i clearly did something dumb along the way...xbmc shouldnt be on F ...slayer makes it "look" like since its a big hard drive that everything should be put on f...and points at E as useing an oem drive...when in fact you really want it all on E so you can format f/g ......or am i wrong

ok cool it just doesnt show the .67 maybe?..maybe that doesnt matter?..if its truely important ill need some help chasing that down ok so the 937 or whatever i was reading is the max per f/g, ill get it chopped down then, its a shame the 2tb thats currently in use as f cant just stay...i aassume errors would eventualy happen if i left it? i assume its easiest to partition the f/g up and then re-use slayer to put all the updated emulators back on and then copy all my stuff off my clone back to it(allready did that in the current huge F) a lil luck and i can get the partitioning done and start a massive data transfer before bed.....cause ive got a washing machine to repair tommaro

new drives working but will need to be made "old" looking LOL so onto partitioning, ive been reading around something about a maximium of 1 tb per drive partition? all i know is right now its showing 2tb on f, but the other 1tb is...missing? is that a bios issue or just a flat limitation? on testing emulation and loading times etc its VERY slow....drive size???? its about half the speed it was when loading but things do run smooth...i just want to get the partitioning figured out before i do a my 2tb dump on it...of course....if im stuck at 2tb ive got some weeding out to do

i was just going off this so i figured maybe the .67 might make a difference?

if i "should" update the bios?> where do i get the file, ive scanned thru the slayer manual(an older version) and found no notes on it, i figure if i should do it..lets do it now..since slayer too is "bios unknown"

after a hand full of discs, memorex +rDL, dynex-r it doesnt like but the memorex +r it did...shrug?...here we go!

ok cool will do....what am i doing wrong with slayer?..its not bothering and just going to error 13, i assume im doing something stupid with the burn or the drive wants some specific setting? drive is currently a clean ntfs format

so use xbpartition tool, or will i only need to worry about the partitioning of "extra space" after slayer is done with it?...trying to figure out what sizes things should be as well

should i start with something....civilized? in size ( say 200? or even smaller?)or just stuff the 3tb that i intended right into it? so fit it all with it booted up eh...ok

and btw guys thanx for all the help, even if im not able to do this as i wanted im atleast getting it done with the help i muchly needed

ok well ive got slayer 2.7 on a disc and a new drive in, and wouldnt ya know it......error 13 LOL ill toss the OE drive it take a mess of screenshots as a referance and then try and get a fresh install going witrh a different new drive...assuming it will do it any pre prep i need to do for said new drive?

somehow i missed that post entirely....sorry kernel version 1.0.5035.1 xbmc build 2.0.1 compiled nov 12 2006 mplayer dev-cvs-060924-2-:59 sep 24 2006 dvd firmware 1.24 hdd firmware 24.84g24 locked storage c 499/499 d no disc e177/4881 x749/749 x748/749 HARDWARE xbox v1.0 serial 508710714502 mopdchip unknown or onbopard(protected) detected bios unknown please add md5