Jump to content

Welcome to our site

Take a moment to join us. You can sign in with Facebook with a couple of clicks. No need for a lengthy registration. We also have Tapatalk support so you can use this forum on your phone the same way you use facebook. It will keep you notified.

Sign in to follow this  
syndicator

1.0 Tsop Bios

Recommended Posts

I have a 1.0 version motherboard. I just did a tsop mod to it.. Actually I had another 1.0 motherboard that I bricked by flashing a bios from the xbox autoinstaller disk it was the 1mb x3 bios that bricked the board and I do not want to make that same mistake again any one got any bios recommendations. At the moment I have the evo from hexon 2018 disk f and g

Share this post


Link to post
Share on other sites

I like EvoX on TSOP because its very stable and there is no config on HDD to mess up. With EVTool its possible to edit the BIOS before flashing, setting its size, dashboard locations, flubber color and stuff like that.

If its a Winbound Flash I use Gentoox Loader for flashing, for everything else EvolutionX with proper md5 of that mod bios in evox.ini

Edited by Traace

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

Board Life Status


Board startup date: April 23, 2017 12:45:48
  • Similar Content

    • By monblondero
      Hello,
      I was flashing the xbox version of the tsop 256 kb with the plug, half finished the process and after this the screen is black. I installed the xchanger chip, the console works, is there any chance to repair the tsop? Regards
    • By Millay
      For the past few weeks i've been looking into modding an xbox, and i've bought quite a good amount of stuff to prepare. I understand that there are like 15 ways to do somethings and it all depends on specifics ecct.. but I just have a few questions. For starters, I understand you have to soft mod your xbox before tsop mod, and you can change out your hdd either after the tsop mod or after softmodding, which way should I do? Also, I would like some emuls so which bios should i be looking into? All I want to do is to be able to boot a few games without putting them in the disk drive, and play some older games, on top of having a nice dash board and boot up screen.
       
      Among the things I've purchased, I also got a ghost case, and I would like to paint my jewel. anybody have advice on that? also, any good looking led mod kits? I've seen a couple, but if anyone has a link to a good treasure trove of either led strips or something to put under my jewel, I would appreciate it. Also, why do some people while installing the ghost case (clear case) not change out the disk reader cover to the transparent one? 
       
      Haven't opened my xbox yet, since its the one from my childhood, I'm trying to save it, but if I can't find a cheap one to mod out, Ill be using what i suspect to be a 1.3. 
    • By Wouter A
      Is there anyone who is in possesion of the force 480P files?
      they where shared by mr. Nova at assemblergames.
      I am in desperate need for these files for the hdmi mod, most larger tv's do not support 480I over HDMI.
       
      thank you for sharing already, i will post a tutorial for adding a WII2HDMI inside an xbox soon, have 4 of them running already ;-).
×

Important Information

By using this site, you agree to our Terms of Use.