I came across this site while searching for solutions to my problem. I was attempting to upgrade my XBOX HDD to a 1 TB WD SATA drive that is listed as lockable. I followed Mr. Mario's tutorial on Youtube to a T, and it appeared to be successful, however upon powering up with the new HDD in place of the old I get error 07 and on occasion 09. When going back and attempting to use Chimp to re-clone the original HDD to the new drive, the new drive cannot be altered due to it being locked. Attempts to unlock the HDD via the Unlock Slave Drive menu in Chimp do not work, all of which lead to the same screen referencing the password from the motherboard, but changing nothing. How do I unlock this drive?
And yes, I have the jumpers currently set to slave, and had them set to master when I attempted to utilize it as the master HDD.
Any help is appreciated.
i've made a few posts in here about my og original xbox and how it has sentimental value to me. i know the hdd will eventually fail on it as all hdd's eventually do. i was thinking of using the softmod exploit just to enable ftp so that i can copy the entire hdd and the eeprom key to my pc. my question is, is there any possible danger in doing this? is it possible that the exploit can mess up my xbox? after i'm finished backing everything up, i want the xbox to be in the same condition it was before i did this. btw, it is a v1.6 and has no mod on it.
Board Life Status
Board startup date: April 23, 2017 12:45:48