All, 
I just recently ressurected my old xbox, and upgraded it to a 2tb drive. I had to upgrade the bios on the chip in order to properly have the system see all the new space. I did so by using the hexen disc. So this worked, but now if i use the Xecutor bios, it takes a little over 10 seconds for it to get to the boot animation screen. If i use evox, its a little quicker, but not by that much. Anything i can do to increase the speed? On the old xecutor bios it was instantaneous. 
 
Thanks in advance!

X3 install  with the push button panel on the front. It will not boot to MS Dash if I push and hold the power button. It quickly flashes red then switches to blue and boots to UnleashX. If I load the X3 menu (hold white button on startup) and select "Reboot With X3 Mod Disabled" it works perfectly - boots to MS Dash. I can also reach the MS Dash by selecting it from the UnleashX menu. Why won't the power button bypass function correctly?

Ich brauche Hilfe beim Einbau des xtender. Es soll in eine v1.1 eingebaut werden leider finde ich keine Anleitung alle Links down