Jump to content
  • Similar Content

    • By AlaskaCC
      X3 install  with the push button panel on the front. It will not boot to MS Dash if I push and hold the power button. It quickly flashes red then switches to blue and boots to UnleashX. If I load the X3 menu (hold white button on startup) and select "Reboot With X3 Mod Disabled" it works perfectly - boots to MS Dash. I can also reach the MS Dash by selecting it from the UnleashX menu. Why won't the power button bypass function correctly?
    • By Jaggsy1986
      I've done the softmod with rocky5 and changed to NTSC in nk patcher and everythings good with componant cable picture wise in dashboard. I've tried launching tiger woods 2004 pal game via disc and just get blank screen ? is there a specific setup in the video options to get pal games to work once you change to NTSC ?
    • By Chris5000
      Hi,
      I just replaced my Philips VAD6011/21 Disc Laser Lens with a Disc Laser Lens for Xbox SPU-3141 Philips Microsoft original from ZedLabz Please login or register to see this link.
      Unfortunately it is still not reading my xbox games discs.  I have the Rocky5 Softmod and it states a DVD drive status of "unknown".  It seems like I did it correctly and desoldered those two points on the new Disc Laser Lens.  Sometimes I will get the "Empty" status too.  
      I tried Pot tweaks on the old laser and then that helped for a very short time so I bought the new laser after it stopped working.
      Any ideas?
      Thanks!
       

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.