Search the Community
Showing results for tags 'external'.
Found 4 results
So finally got the case for the HDMI cable finished! The cable itself does work good and is finally in the last steps off testing. Decided to add the OGX logo to the case to make it look even better. So a little more detail about the hardware now! It is basically a Component to HDMI converter that does reencode the Component signal to a HDMI signal. The Xbox will recognize the cable as a component cable and it is plug and play without the need for an extra psu or anything. The HDMI signal does provide stereo audio and there is an optical out on the pcb for digital audio. Can print the case in different colors once the cables are for sale! Before a lot off people ask about them now they will be for sale in around 4 weeks and i will post the add here in the Forums. Will offer them as finished cable and as an internal install kit without the cable and avip plug for those who want to do an internal install on there Xbox. So keep checking the forums not just facebook And without further talking that's how the final product looks like:
I would like to store my ISOs and ROMs on an external USB disk utilizing a cable plugged into the controller port on the Xbox. Is this possible? Furthermore, which disks are recommended, and which bios/build would be best for this?
So my friend and I are trying to replace the front panel LEDs with RGB LEDs using a separate microcontroller. We were able to read the status from the current front panel so we can react to error codes properly, so it isn't just a "dumb" LED replacement with an external controller. Our next goal was to send commands over the SMBus to the Arduino (Nano, ATmega328P) we use to control the RGB LEDs. I customized the XBMC code to send data to the new address I defined for the Arduino, in our case we used 0xE9. Since the Wire library of the Arduino already shifts the bits, we set the Arduino's address to 0xE9 too. The thing is, the Xbox sends the signal, but the Arduino isn't reacting to the given address. We already tried to analyze the signal and we can confirm that there is data being sent through the SMBus. OFC we wired up SDA and SCL correctly, we checked twice and since the logic analyzer is able to sniff data, it should be correct. Has anyone ever tried this yet? I've seen a couple of threads talking about controlling Ambilight over the SMBus but it seems like nobody has tried it yet. I guess we are doing something wrong, but we haven't yet figured out what it is that we are missing. Next thing would be buying a proper logic analyzer, but maybe somebody here has some experience and could lead us in the right direction before we spend the money. Is there any more documentation on the SMBus of the Xbox out there? I've just found the documented stuff on the xboxdevwiki. Thanks in advance!
Board Life Status
Board startup date: April 23, 2017 12:45:48