Search the Community

Hey everyone. So, I find myself in a unique situation. I will try to break down my problem as simply as possible: ::I have an S-Type (small) Original Xbox controller with a bad cable. I only have this one controller. ::I do not have a breakaway cable to connect the controller to the Xbox, BUT I have an Xbox controller port to female USB port cable. (pictured here: https://ibb.co/wJTTYfL ) My question is this: could I desolder the Xbox controller cable from the controller board and solder on a USB cable with a standard type-A (male) USB connector to connect to the Xbox, through the pictured-above female USB port?

Hello all i have a 360 Controller that is just a standard usb (not Wireless). I tried to use a OG XBOX adapter to USB cable like the one here https://www.ebay.co.uk/itm/331804441332?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=csiq_HSJSIm&sssrc=2349624&ssuid=pkpdgvjyta-&var=&widget_ver=artemis&media=COPY im not getting any joy with no response. The controller lights up for 1 second circling the green disc shape in the middle. I don’t have a 360 so I’m happy to dissemble the controller and change the connectors to work with the OG XBOX. the only information I could find was this quote Xbox connectors are some proprietary USB offshoot.<BR><BR>Xbox 360 connectors are standard USB.<BR><BR> Neither is compatible with the other.

So I have a 1.0 with a dead HDD, I used PiPROM to recover the eeprom.bin so I can build a new drive. Is there a tutorial somewhere on adding a softmod directly to the new drive before I lock it?