Search the Community
Showing results for tags '2.5'.
Found 2 results
I have an unused 80GB 2.5" IDE HDD bought for an old laptop which died before I got around to fitting it. The problem or maybe not a problem is the 2.5" IDE to 3.5" IDE adapter. I've found what I think are suitable ones on Ebay/Amazon (F 2.5" with M 3.5" to connect to the IDE cable). But the thing I'm not sure about is the power supply. The ones I've found have a (F) Molex connector + cable but only wired with red and black cables. This I assume is 5v and ground ie. normal Molex power connections. Is this enough to power the 2.5" HDD? It should be but it got me thinking about why the Xbox HDD power supply has both 5v and 12v connections (red + ground and yellow + ground) if they're not both needed. If a standard 3.5" HDD in the Xbox needs more than 12v available perhaps a 2.5" HDD needs more than 5v too. Knowledgeable advice appreciated.
I have an xchanger chip, I know that we are uploading the firmware over the network or from a cd / dvd disc. What should I do when I download the m7.bin file to the layout? There is a chance to resuscitate him. Because after playing the console does not start. I also tried to load from the evox autoinstaller, but the console is restarting. Do you have any ideas?
Board Life Status
Board startup date: April 23, 2017 12:45:48