Search the Community
Showing results for tags 'reflash'.
Found 3 results
Xecuter 2.6 Reflash help
Samndave1989 posted a topic in BiosI bought an xecuter 2.6 modchip not realising it was flashed for a 1.6 xbox but mine are all 1.0-1.4 how would I go about reflashing so I can install and use this in one of them. Any help greatly appreciated.
Bios reflashHi Everyone, I am new to this forum and despite looking, I couldn't find an answer to my question. Basically, I have an Xbox v1.1 with an ST TSOP. Awhile back I TSOP flashed it using HEXEN 2018 and I flashed on the EvoX M8 + F & G Bios. After this I installed a 2TB Sata HDD and Set up the HDD with 1TB assigned to F and 1TB assigned to G. Over time I have filled up most of the F partition and a lot of the G partition. I want to reflash a customised version of M8 + with no evox logo and my own boot colour scheme but I am worried about some of the options (I am basing the new customised bios on the file "evox.m8plus.fc.137" taken from my HEXEN 2018 iso.) I think I installed the 256k bios initially (even though i know my TSOP has more room) and I'm thinking of keeping it as 256k. Is this what is recommended? BUT mainly, do you think that keeping the LBA48 support setting as "Partition 6 takes up to 137GB/Partition 7 takes rest" will ruin/alter the partitions of my current installed hard drive as described above? I ask because I have about 1.3TB of data already on the HDD and I don't want the BIOS re-flash to wipe all of that just to get rid of the EvoX logo and change the boot colours. Thanks in advance people!
Can I reflash mod chip with newer bios?Hi, I’m new to anything to do with mod chips on the original Xbox so my apologies if I sound like a complete noobie. I recently purchased a Xbox of Facebook market place that has a DuoX2 (blue) mod chip installed. When the console boots is has like a green logo in the top left and Slayers 2.7 underneath the Xbox logo at the bottom of the screen (I’ll add a photo to explain what I’m talking about). Then it boots into evolutionX dashboard I believe. I’ve dabbled with soft modded Xboxes before and wanted to take a crack at a mod chipped one but I’m worried I’ll brick the console if I just try and re flash bios and install a new dashboard. So long story short, is it possible to update the bios on the mod chip to someone a little more recent like EvoX M8 or something? The Xbox is 1.4 console. I opened it and cleaned the console of dust and re did the thermal paste and fixed the DVD belt prior to wanting to update the dashboard and mod chips Bios. any help is much appreciated. Kind Regards, Karl
Board Life Status
Board startup date: April 23, 2017 12:45:48