Search the Community
Showing results for tags 'newly'.
-
I've just tried to install the chip using this guide: https://consolemods.org/wiki/Xbox:Aladdin More precisely I soldered the pin header and the 3.3V, LAD0, LAD1, LAD2 and LAD3. I made a blunder and ruined the trace by R7P4, so needed to reroute it. I would have routed through the hole at the chip pin, but the hole had solder in it that I haven't been able to remove, so I resorted to the hideous mess you can see on the picture. I have checked all the connections with a multimeter. There is 3.3 on pin9. LAD1-3) I have checked as much as I could by putting one of the multimeter probes on the tip of the pin and the other on a point on the trace that is not the solder point directly. In other words, I am reasonably sure that the soldering is "ok" I also cut the L trace because the MrMario2011 video said so. But when I booted only a black screen would show and FRAG. So I restored the L trace to be able to boot into stock BIOS. Now I can only boot into stock. Am I missing something? Have I done something wrong? What can I check? The chip lights red whenever power is plugged into the xbox. I noticed that if I put the chip in with the BT not soldered on the chip the led would dim slightly whenever the xbox was turned on. After I soldering it, it would not dim. Don't know if it means anything. Just mentioning it.
-
well, i modded my 2nd xbox tonight and i'm having a weird problem. on the home screen, the cpu temp is slowly rising. the temp limit was set at 50 c and it would get up to about 51c and the fan would kick up to about 3.0x. so i raised the temp limit to 55c. the xbox is slowly climbing to that temp. it's sitting at 54c right now. what is causing this and how do i fix it? my 1st modded xbox is a version 1.4 and it idles in the 40's at 1.0x fan speed. btw, i changed the 3 caps in front of the heat sink on both systems.i also changed the cpu thermal paste on both systems(i didn't change the gpu thermal paste).
-
Hello all, just got my xbox modded with a 2tb drive and Rocky5's Emustation, looking for some assistance. Most of my roms are running well so far with the exception of N64. Now I know that it is set up to run the N64 set from Earthworm James. Trouble is, I cant find that pack anywhere at all, been searching for days now. I was wondering if anyone here knows where it is or has a link available, any assistance would be greatly appreciated.
Board Life Status
Board startup date: April 23, 2017 12:45:48