Search the Community
Showing results for tags 'low'.
Found 3 results
-
I have a strange issue in my set up. I have my OG Xbox (OpenXenium, PrometheOS, Cerbios, Xbmc4Gamers) connected to a RetroTINK 4k using a component cable. I made this component myself from a Xbox 360 component cable and OG Xbox AV connector (actually I made two of them). When I turn on the RetroTINK 4K and turn on the OG Xbox the audio volume is very low. But no distortion is persent, not in the video nor in the audio. When I reseat the AV connector on the Xbox side the volume is on a normal level. When I connect the Xbox using the same cable directly to a TV, the volume is always on a normal level. I have the same issue with two component cables. Today I finished recapping my Xbox, with no luck. Anyone knows how to fix this?
-
Hi all, I have a TSOP modded Xbox that was sitting in the closet for months. Connected it today to a CRT using component cables and the audio output was very low (on the startup sequence, on xbmc4gamers and on games). I went to the original dashboard to the audio settings, the audio mode was set to Dolby Surround. Also, Dolby Digital and DTS were enabled in the audio settings. I disable Dolby Digital and DTS and set the audio mode to stereo since it is a CRT TV, but the audio is still very low. I tried with another xbox on the same crt and same cables and the audio for that one is ok anyone have this issue before? What can I do to fix this?
-
Dears My xbox 1.6 is working intermittently. Checking the PSU, it was identified that where it should present 5v, I find approximately 1v. In addition, there is noise in the low voltage sector. In visual analysis, there are no components with deformations. However, this behavior is intermittent and, at the moment I write to you, it is working normally. Any tips on how to fix?
Board Life Status
Board startup date: April 23, 2017 12:45:48