Search the Community

When pressing the power button, nothing happens. Sometimes it would make the fan reach max speed 3 times and flash orange for a split second. Sometimes it would do something in between and slightly nudge the fan to spin and nothing more. I should mention my xbox has a modchip. Based off the information i have gathered from forums and reddit posts, this is what i know; - IDE cable and disc drive are not the cause of the problem, everything is disconnected from the motherboard - power button and eject button work - checked the board for corrosion, cleaned with iso. alchohol - fuse on power supply is good - checked voltages on power supply ATX connector (connected it to the motherboard, stuck the probes inside the connector where the wires go and pressed the power button. This probably isnt the way to do it i know). The standby and power on voltages match, but after a few seconds the drop back to zero (excluding the orange wires which do have standby voltage) because i presume the xbox doesnt boot - checked the transistor at Q7C2 and i am not getting a match for the voltages. 1.1v on the collector and 0.6 on the emitter. I might have read the values wrong, but the still dont reach what the are supposed to Not losing hope, open to all suggestions

Where can I change fan speed? Since Insignia I flashed my TSOP with EvoX M8+... I used to have iND before... The problem is, I don't know where to setup the fan speed... I can change it in XBMC4GAMERS but as soon as I start a App or Game it changes back to low speed. This is not good because I'm useing a different silence fan that needs to run at least with 80% speed to keep the Xbox cooled. My Xbox HDD is installed with Hexen2020. It has all the other Dashboards and I tried everything... Dashboards from Apps folder, HexenTools folder, C Partition... but it won't work, it won't save the fan speed like it did with iND and his config file. Any idea?