Search the Community

I'm very new to the modding scene. I'm using pretty cheap Component cables but everything looks and sounds fine in 480i. I've tried using MS dash to enable the settings but it seems to have no effect. It stays ON in MS even after reboot but there's no change. Once I enable any of the HD settings in UnleashX and reboot, I hear everything but no video outputs. I've tried each one 1 at a time and just 2 and all 3. Same result, no video output. For info, It's a v1.6 with an Aladdin XT, I Added 2Tb HDD. Unlocked. And it's NTSC. Am I missing something simple or could this be bad cables or motherboard issue? Every guide I've seen makes it look so simple. When I plug in my composite cable it will automatically reboot and I don't have the option to enable or disable HD. I can't set it to default with composite cables. The only way I can undo it is by listening the audio and going through the menu blind and changing it back with my component cable. Which isn't that difficult. I can't find this specific issue here so if it exists I'd be happy to read the thread. Thank you.

Hi, i purchased a faulty 1.6 xbox which was modded with xecuter 3 and the front control panel, the xbox was powering up but no sign of life on the chip or front panel, upon inspection the lpc rebuild board wasnt installed straight, it seemed to be slightly skew, i didnt really have the proper kit to remove and reseat the lpc rebuild board so i desoldered everything else and re-installed it all into a 1.4 so no need for the lpc board, i now have signs of life on the chip (chip lights up blue) and the front control panel (logo lights red and hdd activity light blinks) however i cant get the chip to enable, ive tried the bank switches in various positions, short press, long press, if i try pressing eject and power together the xbox frags once then powers up normally but the logo light is always red, ive retried all my solder points on the lpc / d0 but to no avail, anyone have any ideas anything else i could try? thanks