Search the Community
Showing results for tags 'cap?'.
-
First question would be, is there issues with 3rd party controllers support in the Xenium OS Menu? Because I've had this issue occur numerous times where I test the console beforehand inside the retail menu. Then I apply restoration services and modding. Then after all the cleaning, re-caps, and modding I'm at the Xenium menu and the controllers won't work to navigate. Not a single port will read or move the menu, just strange but I'm almost thinking it's the controller being 3rd party.
-
siting here running updates, with dave as my co-pilot, ive been thinking about permanent solutions, not just long term but something we can do once and never muck with it again, and yes im fully aware we can network out and get time untill something changes a site goes dead or we live with a wrong clock..... so the obvious one to me would be to run a set of wires off the clock cap pins out the back of the box and do an external battery backup mounted between the AV and the cat5, but..lets face it, how longs it going to last?, how long would it take to charge?..theres ALOT of variables and too much chance for a dead clock that needs reset me personaly i keep ALL of my vintage consoles on a switch box so that their bricks and power boards dont EVER see voltage unless they are in use, to preserve caps, boards and bricks, and heaven forbid..a power surge of some kind that manages to get past my ups, i figure setup like that my consoles should out live me..i hope, for the guys that dont unplug or kill power, you just replace the cap, or go with a small battery but its got me thinking about not only the xbox but any other unit with a clock cap that could be without power for weeks...months....lets face it we never know what life throws at us so what do we know, ..its a 2.5v cap...but what amps?..if we were to run 2 wires and add a port to the back of the box we should be able to add some manner of small wall wort brick and step down the amps/volts, heck you could use the same wall wort to keep clock voltage on multiple consoles depending on how they are displayed...im not just thinking the X but any/all systems anyway its an idea im tossing out there however dumb it may sound at the moment
Board Life Status
Board startup date: April 23, 2017 12:45:48