Search the Community
Showing results for tags '(openxenium)'.
-
I made the boneheaded mistake of flashing my backup 1.2's TSOP chip with a retail BIOS while the hard disk was unlocked. I ended up purchasing an OpenXenium that was pulled from another console (evidently a 1.6 based on the use of the 1.6 jumper). After installing the pin header and connecting D0 to the chip on the underside of the board (I found continuity between the pad on the chip and the topside via for D0) I found that the console wouldn't boot. It was the typical 3 boot attempts before a 50:50 FRAG. I'm unsure as to why this is happening, it was previously used which leads me to believe it was working just fine in the console it came from. The only thing I've yet to try is to install it into my main 1.2 and see if it has the same problem there, and if so, I can figure out if the CPLD needs reprogramming and the flash chip needs XeniumOS reflashed. Has anyone else had an issue like this with their OpenXenium?
- 12 replies
Board Life Status
Board startup date: April 23, 2017 12:45:48